Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FEATURES:
Nylon building and construction
Black in color

SUCHES AS:
One Wheelie Bar
One 2x14mm Cap Head Screws
Two 2x8mm Cap Head Screws
Direction Sheet

NEEDS:
Installation at rear of chassis

Want another excellent thing to compliment the above pointed out thing?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools required for routine upkeep on over a lots of the
    most popular Traxxas vehicles in addition to lots of other RC vehicles
Nut drivers, hex drivers, screwdrivers and turnbuckle wrench in
    numerous sizes
Ergonomic cog handle
Adjustable bit length
Black nylon zippered bring case with Duratrax logo

SUCHES AS:
4, 5, 5.5, 7 and 8mm Nut Motorists
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Cog Handle

Lots of others have gotten this thing in addition to the thing that you are presently reviewing.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Removal

SUCHES AS:
10 Bent Silver Metal Body Clips

NEEDS:
Assembly onto Car

Right here is another thing that compliments the thing being reviewed.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

SUCHES AS:
One Diff Ring Equipment
One Pinion Equipment

NEEDS:
Installation on the vehicle

Frequently gotten with the thing that you are presently reviewing.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale car applications
Prewired with Traxxas high existing adapter

SUCHES AS:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Rated Capability: 1300mAh
Release Score: 25C constant
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Connector: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER permit to Release below 2.5V per cell
NEVER dismantle or modify pack circuitry in any method or puncture cells
NEVER place on combustible products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant area
ALWAYS set battery charger's output volts to match battery volts
ALWAYS stay out of reach of kids
All weights such as wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm