Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the glow powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The included TQi 2.4GHz radio system works only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic elements to manage wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and bring manage
Drive: 4 wheel
Drive Type: Shaft driven, shafts are .71" (18mm) diameter with
    half shafts and rubber protected stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high flow dual stage air filter with 60% more peak
    horsepower than the TRX 2.5 engine, EZ-Start electric starter and
    7.2V battery
Exhaust: Sleek resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip leading cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    steering servo, might be equipped with the Traxxas Link Wireless
    Module (not included, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered independently) into an effective tuning
    tool
Clutch: 2 shoe composite building and construction
Transmission: Vehicle shifting wide ratio 2 speed, forward only
Ball Bearings: Complete set included, rubber sealed bearings used in all
    exposed areas
Shocks: 4 GTR inboard mounted, upkeep complimentary, silicone oil-filled
    difficult anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Gearbox: Sealed front and rear
Bumpers: Flexible molded front and rear tube design
Suspension: Linkage based for long travel and precise tuning
    adjustments and control
Differentials: Upkeep complimentary, sealed with silicone X-rings and
    gaskets, limited slip action can be tuned using different viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) diameter drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi surface, soft compound rubber
    1.6" (42mm) wide, 4.3"
    (109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm)
    outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and trimmed with decals used
Bumpers: Front and rear, plastic building and construction
Suspension: Variable progressive 2 rocker design, suspension travel
    not restricted to length of shocks, flight height, suspension travel
    and progressive rate can be adjusted completely independent of each
    other, rubber sealed pivot balls can be adjusted with included tool
    without eliminating seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when viewed from front or behind automobile
Steering: Ball bearing boosted with twin high-torque servos driving
    a durable servo saver
Warranty: 1 Month warranty on electronic elements
    Chassis and engine are required devoid of flaws at the date of
    purchase before use. No warranties are expressed or implied that
    cover damage brought on by normal use or wear, or cover or suggest
    for how long any chassis or engine part will last before needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing steering servo, one basic servo, 15T clutch
    bell, 38T spur gear, tool set, highlighted handbook, decals, 2 air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, additional glow plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECS:
Car-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is available in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings used in the Slayer Pro are rubber shielded.
The following list includes the rubber protected bearings and the
    non-shielded DuraTrax brand as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Place Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Main Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Main Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Main Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Stimulate Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611