Traxxas 1/10 Nitro Rustler 2WD w/TSM

This is the radiance powered, 2.4GHz radio managed, ready-to-run
    Traxxas Nitro Rustler 1/10 scale Stadium Race Truck
with Traxxas Stability Management.

**The consisted of TQ 2.4GHz radio system works just with the**
**#6519 receiver and does NOT accept the Docking Base device.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic elements to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: T-6 aluminum anodized blue with fiber composite upper plate/
    front brace
Radio: Traxxas TQ 2.4GHz radio system
Engine: Traxxas 2.5 racing engine with EZ-Start electrical starter,
    slide valve carb, 2 radiance plugs, air filter and cylinder head
    protector, battery and battery charger for EZ-Start
Exhaust: Composite tuned pipe with aluminum header
Own: Rear wheel with telescoping U-joint drive shafts
Body: Pre-painted, pre-cut polycarbonate body
Shocks: Four composite bodied oil-filled
Slipper Clutch: Adjustable
Suspension: 4-wheel independent
Transmission: Ball bearing equipped, Magnum 281
Differential: Planetary equipment with steel internal gears
Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb
Brake: Composite disc type
Spur Gear: Nylon, 70 tooth 32-pitch
Wheels: Chrome 2.0" (51mm) wide, 2.8" (71mm) size five-split
    spoke Jato
Tires: Front, ribbed 2.8" (71mm) inner size, 2" (51mm) wide
Rear, Traxxas Alias 2.8" (71mm) inner size, 2" (51mm) wide
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the vehicle in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when seen from front or behind car
    suspension when seen from the side of the vehicle in relation to thei
    chassis

INCLUDES:
Assembled Nitro Rustler with TRX-2.5 racing engine and radiance plug,
    TSM, EZ-Start electrical starter, painted body with rear wing,
    decals, 2.4GHz radio system, tuned pipe, guideline sheet, extra
    radiance plug, fuel bottle, tools, battery & battery charger

NEEDS:
"AA" Batteries: 8 (4 for transmitter and 4 for receiver)
Fuel: Car fuel with 10-15% nitromethane content
Misc. Products: Building and track devices

SPECIFICATIONS:
Length: 17-1/4" (438mm)
Front Track: 12-1/2" (318mm)
Rear Track: 12-3/8" (314mm)
Weight: 60 ounces (1701g) without radio
Height: 6" (152mm)
Wheelbase: 11.3" (287mm)
Fuel Capacity: 2.5 ounces (75cc)
Engine: TRX 2.5 racing w/EZ Start System
Gear ratio: Adjustable 8.43:1 to 12.64:1
Differential: Planetary equipment
Brake: Disc
Chassis: Double-decker (bottom aluminum,top composite)
Spur equipment: Nylon, 70 tooth 32-pitch
Clutch bell: 20 steel tooth
Caster block: Front 30 degrees

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
4 5x11mm Front Wheels 2 DTXC1547
4 5x11mm Back Wheels 2 DTXC1547
6 5x11mm Transmission 3 DTXC1547
2 5x11mm Clutch Bell 1 DTXC1547

Readily available in the following color schemes,
    Blue, TRAD58BB Silver/Blue, TRAD58SB
    Red, TRAD58RR Silver/Red, TRAD58SR

REPLACING EZ STARTER WITH BASIC RECOIL STARTER
    To convert the EZ starting to a standard pull starter, purchase
    part numbers TRAG5170, TRAP5211 one-way bearing, 4 3x8mm device
    screws, secure the 3 bolts on the EZ-Starter, clip the wires
    on the EZ-Starter, and set up recoil pullstart.