Traxxas 1/10 Bandit VXL RTR w/Stability Management

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run
Traxxas Outlaw VXL Brushless Motor Powered Off-Road Buggy
with Traxxas Stability Management.

Equipped with the Velineon Extreme Brushless Power System consisting of;
Exclusive Waterproof Style
Traxxas High Current Port
Maxx Cable television 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    fine tuned or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Fiber composite bathtub design .15" (4mm) thick
Drive: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas TQi 2.4GHz Direct Sequence Spread Spectrum (DSSS)
    programmable system with Traxxas Link automated model recognition
    that enables approximately 20 Traxxas Link receivers and transmitters to be
    bound, transmitter instantly remembers settings for any
    previously bound receiver
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
Battery Charger: 110V Air Conditioner powered
Shocks: Ultra Shocks with powder coated White springs
Gearbox: Sealed
Differentials: Planetary gear type with solidified steel gears
Transmission: Three gear variable ratio with sealed ball bearings and
    telescoping driveshafts
Slipper Clutch: Revo Spec Torque-Control-adjustable to provide
    consistent traction control
Tires: Alias 2.2 racing tires, stepped pin rear and ribbed front
Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with centered kingpin
Camber Tie Rods: Repaired non-adjustable
Steering Tie Rods: Adjustable with Jato design steel turnbuckles and
    strong rod ends
Steering: Bell-crank with laydown servo positioning and servo saver
    new design front guiding spindles with 5x11mm rubber sealed
    bearings

INCLUDES:
Traxxas Outlaw VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion gear, Black-Chrome tracer 2.2" wheels, radio,
76 spur gear, guidelines, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, charger, Traxxas
Stability Management

REQUIRES:
AA Batteries: Four for transmitter
Misc. Items: Structure and track devices

SPECS:
CAR-
Length: 16.26" (413mm)
Width: 10.25 (260mm)
Height: 7.3" (186mm)
Weight: 3.0" (1380g) with body
Wheelbase: 11.58" (294mm)
Tread: Front- 9.1" (232mm) Rear- 8.25" (209mm) side-to-side at wheel
    centers
Front Track: 10.16" (258mm)
Rear Track: 9.92" (252mm)
Ground Clearance: 1" (25mm)
    BODY-
Length: 14.75" (375mm)
Width: 5.4" (138mm) at rear wheels (best point)
1.5" (39mm) behind from wheels (thinnest point)
Height: 3.7" (95mm)

REMARKS:
The DuraTrax Element 3900kV Brushless System (DTXC3122) is a perfect,
    budget-friendly upgrade for this vehicle.

For replacement ball bearings utilize:
    Qty. Size Area Bearing Set
    4 5x11mm Front Wheels order 2 DTXC1547
    4 5x11mm Rear Wheels order 2 DTXC1547
    6 5x11mm Transmission order 3 DTXC1547

The TSM Outlaw is offered in the following colors;
    Blue, TRAD36BB Red, TRAD36RR
    Black, TRAD36LL Silver, TRAD36SS