Traxxas 1/10 Bandit VXL RTR w/Stability Management

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run
Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy
with Traxxas Stability Management.

Equipped with the Velineon Extreme Brushless Power System consisting of;
Exclusive Waterproof Design
Traxxas High Current Adapter
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic parts to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or switched off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Fiber composite bath tub style .15" (4mm) thick
Drive: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas TQi 2.4GHz Direct Series Spread Spectrum (DSSS)
    programmable system with Traxxas Link automated design recognition
    that enables as much as 20 Traxxas Link receivers and transmitters to be
    bound, transmitter automatically remembers settings for any
    previously bound receiver
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
Battery Charger: 110V Air Conditioning powered
Shocks: Ultra Shocks with powder coated White springs
Transmission: Sealed
Differentials: Planetary equipment type with solidified steel equipments
Transmission: Three equipment variable ratio with sealed ball bearings and
    telescoping driveshafts
Slipper Clutch: Revo Spec Torque-Control-adjustable to offer
    constant traction control
Tires: Alias 2.2 racing tires, stepped pin back and ribbed front
Wheels: 2.2" (56mm) Black Chrome surface Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with centered kingpin
Camber Tie Rods: Repaired non-adjustable
Steering Tie Rods: Adjustable with Jato style steel turnbuckles and
    heavy duty rod ends
Steering: Bell-crank with laydown servo positioning and servo saver
    new style front steering spindles with 5x11mm rubber sealed
    bearings

INCLUDES:
Traxxas Bandit VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion equipment, Black-Chrome tracer 2.2" wheels, radio,
76 spur equipment, instructions, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, battery charger, Traxxas
Stability Management

REQUIRES:
AA Batteries: 4 for transmitter
Misc. Products: Building and track devices

SPECIFICATIONS:
VEHICLE-
Length: 16.26" (413mm)
Width: 10.25 (260mm)
Height: 7.3" (186mm)
Weight: 3.0" (1380g) with body
Wheelbase: 11.58" (294mm)
Tread: Front- 9.1" (232mm) Back- 8.25" (209mm) side-to-side at wheel
    centers
Front Track: 10.16" (258mm)
Rear Track: 9.92" (252mm)
Ground Clearance: 1" (25mm)
    BODY-
Length: 14.75" (375mm)
Width: 5.4" (138mm) at rear wheels (largest point)
1.5" (39mm) behind from wheels (thinnest point)
Height: 3.7" (95mm)

COMMENTS:
The DuraTrax Aspect 3900kV Brushless System (DTXC3122) is an ideal,
    economical upgrade for this vehicle.

For replacement ball bearings use:
    Qty. Size Area Bearing Set
    4 5x11mm Front Wheels order 2 DTXC1547
    4 5x11mm Back Wheels order 2 DTXC1547
    6 5x11mm Transmission order 3 DTXC1547

The TSM Bandit is readily available in the following colors;
    Blue, TRAD36BB Red, TRAD36RR
    Black, TRAD36LL Silver, TRAD36SS