Traxxas 1/10 Bandit VXL RTR w/Stability Management

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run
Traxxas Outlaw VXL Brushless Motor Powered Off-Road Buggy
with Traxxas Stability Management.

Equipped with the Velineon Extreme Brushless Power System including;
Exclusive Waterproof Design
Traxxas High Current Adapter
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic parts to manage wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Fiber composite bathtub style .15" (4mm) thick
Own: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas TQi 2.4GHz Direct Sequence Spread Spectrum (DSSS)
    programmable system with Traxxas Link automatic design recognition
    that allows up to 20 Traxxas Link receivers and transmitters to be
    bound, transmitter automatically recalls settings for any
    previously bound receiver
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
Battery Charger: 110V Air Conditioning powered
Shocks: Ultra Shocks with powder layered White springs
Gearbox: Sealed
Differentials: Planetary gear type with hardened steel gears
Transmission: 3 gear variable ratio with sealed ball bearings and
    telescoping driveshafts
Slipper Clutch: Revo Spec Torque-Control-adjustable to provide
    constant traction control
Tires: Alias 2.2 racing tires, stepped pin back and ribbed front
Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with focused kingpin
Camber Tie Rods: Repaired non-adjustable
Steering Tie Rods: Adjustable with Jato style steel turnbuckles and
    strong rod ends
Steering: Bell-crank with laydown servo placement and servo saver
    new design front guiding spindles with 5x11mm rubber sealed
    bearings

CONSISTS OF:
Traxxas Outlaw VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion gear, Black-Chrome tracer 2.2" wheels, radio,
76 spur gear, instructions, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, battery charger, Traxxas
Stability Management

NEEDS:
AA Batteries: Four for transmitter
Misc. Products: Building and track devices

SPECIFICATIONS:
LORRY-
Length: 16.26" (413mm)
Width: 10.25 (260mm)
Height: 7.3" (186mm)
Weight: 3.0" (1380g) with body
Wheelbase: 11.58" (294mm)
Tread: Front- 9.1" (232mm) Back- 8.25" (209mm) side-to-side at wheel
    centers
Front Track: 10.16" (258mm)
Rear Track: 9.92" (252mm)
Ground Clearance: 1" (25mm)
    BODY-
Length: 14.75" (375mm)
Width: 5.4" (138mm) at rear wheels (best point)
1.5" (39mm) behind from wheels (thinnest point)
Height: 3.7" (95mm)

COMMENTS:
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
    budget-friendly upgrade for this vehicle.

For replacement ball bearings use:
    Qty. Size Location Bearing Set
    4 5x11mm Front Wheels order 2 DTXC1547
    4 5x11mm Back Wheels order 2 DTXC1547
    6 5x11mm Transmission order 3 DTXC1547

The TSM Outlaw is offered in the following colors;
    Blue, TRAD36BB Red, TRAD36RR
    Black, TRAD36LL Silver, TRAD36SS