Traxxas 1/10 Bandit VXL RTR w/Stability Management

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run
Traxxas Outlaw VXL Brushless Motor Powered Off-Road Buggy
with Traxxas Stability Management.

Equipped with the Velineon Extreme Brushless Power System including;
Exclusive Waterproof Design
Traxxas High Current Connector
Maxx Cable television 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic components to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or turned off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Fiber composite bathtub design .15" (4mm) thick
Own: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas TQi 2.4GHz Direct Sequence Spread Spectrum (DSSS)
    programmable system with Traxxas Link automated design recognition
    that permits up to 20 Traxxas Link receivers and transmitters to be
    bound, transmitter automatically remembers settings for any
    formerly bound receiver
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
Battery Charger: 110V Air Conditioning powered
Shocks: Ultra Shocks with powder layered White springs
Transmission: Sealed
Differentials: Planetary equipment type with hardened steel gears
Transmission: 3 equipment variable ratio with sealed ball bearings and
    telescoping driveshafts
Slipper Clutch: Revo Spec Torque-Control-adjustable to offer
    constant traction control
Tires: Alias 2.2 racing tires, stepped pin back and ribbed front
Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with centered kingpin
Camber Tie Rods: Repaired non-adjustable
Steering Tie Rods: Adjustable with Jato design steel turnbuckles and
    heavy duty rod ends
Steering: Bell-crank with laydown servo positioning and servo saver
    brand-new design front guiding spindles with 5x11mm rubber sealed
    bearings

CONSISTS OF:
Traxxas Outlaw VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion equipment, Black-Chrome tracer 2.2" wheels, radio,
76 spur equipment, instructions, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, charger, Traxxas
Stability Management

REQUIRES:
AA Batteries: 4 for transmitter
Misc. Products: Structure and track devices

SPECIFICATIONS:
AUTOMOBILE-
Length: 16.26" (413mm)
Width: 10.25 (260mm)
Height: 7.3" (186mm)
Weight: 3.0" (1380g) with body
Wheelbase: 11.58" (294mm)
Tread: Front- 9.1" (232mm) Rear- 8.25" (209mm) side-to-side at wheel
    centers
Front Track: 10.16" (258mm)
Rear Track: 9.92" (252mm)
Ground Clearance: 1" (25mm)
    BODY-
Length: 14.75" (375mm)
Width: 5.4" (138mm) at rear wheels (best point)
1.5" (39mm) behind from wheels (thinnest point)
Height: 3.7" (95mm)

REMARKS:
The DuraTrax Element 3900kV Brushless System (DTXC3122) is a perfect,
    economical upgrade for this vehicle.

For replacement ball bearings utilize:
    Qty. Size Place Bearing Set
    4 5x11mm Front Wheels order 2 DTXC1547
    4 5x11mm Rear Wheels order 2 DTXC1547
    6 5x11mm Transmission order 3 DTXC1547

The TSM Outlaw is readily available in the following colors;
    Blue, TRAD36BB Red, TRAD36RR
    Black, TRAD36LL Silver, TRAD36SS