Traxxas 1/10 Bandit VXL RTR w/Stability Management

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run
Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy
with Traxxas Stability Management.

Equipped with the Velineon Extreme Brushless Power System including;
Exclusive Waterproof Design
Traxxas High Current Connector
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to control wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    fine tuned or turned off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Fiber composite bath tub design .15" (4mm) thick
Own: Rear wheel drive
Motor: Traxxas Velineon 3500 brushless
Radio: Traxxas TQi 2.4GHz Direct Series Spread Spectrum (DSSS)
    programmable system with Traxxas Link automatic design acknowledgment
    that enables as much as 20 Traxxas Link receivers and transmitters to be
    bound, transmitter immediately recalls settings for any
    previously bound receiver
Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
Battery Battery charger: 110V AC powered
Shocks: Ultra Shocks with powder layered White springs
Gearbox: Sealed
Differentials: Planetary gear type with solidified steel gears
Transmission: Three gear variable ratio with sealed ball bearings and
    telescoping driveshafts
Slipper Clutch: Revo Specification Torque-Control-adjustable to offer
    consistent traction control
Tires: Alias 2.2 racing tires, stepped pin back and ribbed front
Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
Body: Traxxas ProGraphix painted body with wing
Bumpers: Front, Black plastic
Suspension: Live axle front with focused kingpin
Camber Tie Rods: Fixed non-adjustable
Steering Tie Rods: Adjustable with Jato design steel turnbuckles and
    heavy duty rod ends
Steering: Bell-crank with laydown servo positioning and servo saver
    brand-new design front guiding spindles with 5x11mm rubber sealed
    bearings

INCLUDES:
Traxxas Bandit VXL, Velineon Brushless motor, Velineon VXL-3s ESC,
26 tooth pinion gear, Black-Chrome tracer 2.2" wheels, radio,
76 spur gear, instructions, wrenches, aftermarket servo adapters,
pre-load spacers & shock pistons, battery pad, replacement screws,
body clips and washers, 7-cell battery, charger, Traxxas
Stability Management

NEEDS:
AA Batteries: 4 for transmitter
Misc. Products: Structure and track equipment

SPECS:
CAR-
Length: 16.26" (413mm)
Width: 10.25 (260mm)
Height: 7.3" (186mm)
Weight: 3.0" (1380g) with body
Wheelbase: 11.58" (294mm)
Tread: Front- 9.1" (232mm) Rear- 8.25" (209mm) side-to-side at wheel
    centers
Front Track: 10.16" (258mm)
Rear Track: 9.92" (252mm)
Ground Clearance: 1" (25mm)
    BODY-
Length: 14.75" (375mm)
Width: 5.4" (138mm) at rear wheels (widest point)
1.5" (39mm) behind from wheels (thinnest point)
Height: 3.7" (95mm)

COMMENTS:
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
    budget-friendly upgrade for this vehicle.

For replacement ball bearings use:
    Qty. Size Location Bearing Set
    4 5x11mm Front Wheels order 2 DTXC1547
    4 5x11mm Rear Wheels order 2 DTXC1547
    6 5x11mm Transmission order 3 DTXC1547

The TSM Bandit is offered in the following colors;
    Blue, TRAD36BB Red, TRAD36RR
    Black, TRAD36LL Silver, TRAD36SS