Top Flite MonoKote Yellow 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, and When Compared with "old fashioned" Coverings, Quick To Use.

For terrific covering concepts and to guarantee a quality surface order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive is Triggered When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Waterproof
More powerful and Lighter Than Traditional Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Yellow Covering
One Direction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Various Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Same Color, it is Suggested to
    Use a 25' Roll (TOPQ1203) To Make sure the Same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Must Be Utilized With LustreKote Paint to Highlight Its
    Real Color.
MonoKote Trim Sheet: TOPQ4103

MonoKote is a High Temperature level Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Use the Following:
EconoKote Covering: TOPQ2603-TOPQ2612
    (EconoKote may be used on top of, but not under MonoKote.)
Temperature level Varies:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F