Top Flite MonoKote Neon Orange 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Inexpensive,
Easy, Clean, when Compared with "old fashioned" Coverings, Quick To Use.

For excellent covering ideas and to insure an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive Triggers When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Water resistant
More powerful and Lighter Than Conventional Silk and Dope Coverings
Might be Cleaned Up with Glass Cleaner, "409", or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Neon Orange Covering
One Direction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote Might
    Vary Slightly In Color In Between Production Runs of These Products.
If Utilizing Three or More Rolls of the Same Color, it is Suggested to
    Utilize a 25' Roll (TOPQ1508) To Make Sure the Exact Same Dye Lot for the Entire
    Design Being Covered.
LustreKote Guide Need To Be Utilized With LustreKote Paint to Draw out Its
    True Color.
LustreKote Paint: NONE
MonoKote Trim Sheet: TOPQ4136

MonoKote is a High Temperature Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Utilize the Following:
EconoKote Covering: NONE
    (EconoKote might be used on top of, but not under MonoKote.)
Temperature Varies:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F