Top Flite MonoKote Metallic Charcoal 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Economical,
Easy, Clean, when Compared to "old made" Coverings, Quick To Use.

For great covering ideas and to insure an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Triggers When Heat is Applied
Shrinks to a Drum-Tight Complete As It Cools
High Gloss End Up
Fuelproof and Water resistant
Stronger and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Metallic Charcoal Covering
One Guideline Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote Might
    Vary Somewhat In Color Between Production Runs of These Products.
If Using 3 or More Rolls of the Very same Color, it is Recommended to
    Utilize a 25' Roll To Make Sure the Very Same Dye Lot for the Entire
    Design Being Covered.
LustreKote Guide Need To Be Used With LustreKote Paint to Highlight Its
    Real Color.
LustreKote Paint: NONE
MonoKote Trim Sheet: TOPQ4129

MonoKote is a High Temperature Covering, NOT For Usage Straight On Foam
EconoKote IS For Usage Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be used on top of, however not under MonoKote.)
Temperature Varies:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F