Top Flite MonoKote Maroon 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Affordable,
Easy, Clean, when Compared with "old made" Coverings, Quick To Use.

For excellent covering concepts and to insure a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Activates When Heat is Applied
Diminishes to a Drum-Tight End up As It Cools
High Gloss End up
Fuelproof and Water resistant
Stronger and Lighter Than Standard Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Maroon Covering
One Guideline Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Various Lots of MonoKote Might
    Vary A little In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Very same Color, it is Recommended to
    Use a 25' Roll (TOPQ1213) To Guarantee the Very same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Need to Be Utilized With LustreKote Paint to Bring Out Its
    True Color.
MonoKote Trim Sheet: NONE

MonoKote is a Heat Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam, Use the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote may be used on top of, however not under MonoKote.)
Temperature Ranges:
    Connecting to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F

Want another fantastic thing to enhance the above discussed thing?



This is a Master Airscrew Injection-Molded Fiberglass Filled Nylon Propeller.
Excellent for Any Kind of Application, from
Training and Sport Flying to Major Competition.

FEATURES:
NASA Airfoils and Constant-Pitch Designs enable this Prop to
    provide more Thrust at Lower RPM.
The Newest in Engineering Innovation used for this Upgraded Design.
Lower Noise and Accurate Balance
Offered in a Wide Range of Sizes to Fit Every Application.
Propeller is completely fuel-proof.

CONSISTS OF:
One Black 9x6 Fiberglass/Nylon Prop

SPECS:
Center Hole Diameter: 1/4" approx.
Propeller Diameter: 9"
Prop Pitch: 6"

REQUIRES:
Depending upon the engine crankshaft size, the propeller may need to
    be reamed to a bigger size utilizing GPMQ5005 (SAE) or
    GPMQ5007 (Metric).

REMARKS:
Four-stroke engines are generally higher torque engines and ought to
    use the larger props suggested in the range.
Recommended prop ranges will differ depending on your particular engine
    and airplane.
The Chart below represents average prop usage and ought to be used as
    Only a General Standard. Constantly describe the manufacturer's
    instructions included with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A