Top Flite MonoKote Jet White 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, when Compared to "old made" Coverings, Quick To Use.

For terrific covering concepts and to insure an expert finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive Turns on When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Waterproof
More powerful and Lighter Than Conventional Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Jet White Covering
One Instruction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
    Vary A little In Color In between Production Runs of These Products.
If Utilizing Three or More Rolls of the Exact same Color, it is Recommended to
    Use a 25' Roll (TOPQ1204) To Ensure the Exact same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Should Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: TOPQ4104

MonoKote is a High Temperature level Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam, Use the Following:
EconoKote Covering: TOPQ2604-TOPQ2612
    (EconoKote might be utilized on top of MonoKote, however not under MonoKote.)
Temperature level Ranges:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Optimum Shrinkage: 270 - 350°F

Get this thing to boost the one you are reading around.

Nylon Hinges

These are Conventional Nylon Hinges

FUNCTIONS:
Nylon building and construction w/steel hinge pin

CONSISTS OF:
Six hinges

SPECS:
5/8"x1-1/8" total unfolded length

COMMENTS:
Precision molded, examined and assembled with secured hinge pin.
Easy to install. Hinges have 6 holes on each side for maximum
holding power.

Numerous others have bought this thing along with the thing that you are presently reviewing.

MonoKote Orange 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, when Compared to "old made" Coverings, Quick To Use.

For terrific covering concepts and to insure an expert finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only .2 oz/sq ft
Dry Adhesive Turns on When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Waterproof
More powerful and Lighter Than Conventional Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Orange Covering
One Instruction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
    Vary A little In Color In between Production Runs of These Products.

If Utilizing Three or More Rolls of the Exact same Color, it is Recommended to
    Use a 25' Roll (TOPQ1202) To Ensure the Exact same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Should Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: TOPQ4102

MonoKote is a High Temperature level Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam, Use the Following:
EconoKote Covering: TOPQ2602-TOPQ2612
    (EconoKote might be utilized on top of, however not under MonoKote.)
Temperature level Ranges:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Optimum Shrinkage: 270 - 350°F