Top Flite MonoKote Flat Insignia Blue 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Low-cost,
Easy, Clean, when Compared to "old made" Coverings, Quick To Use.

For excellent covering concepts and to guarantee a professional surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Triggers When Heat is Applied
Shrinks to a Drum-Tight Complete As It Cools
Fuelproof and Water resistant
Stronger and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One 6' x 26" Roll of Flat Insignia Blue Covering w/Instruction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Great deals of MonoKote Might
    Vary A little In Color In Between Production Runs of These Products.
If Using 3 or More Rolls of the Very Same Color, it is Suggested to
    Utilize a 25' Roll To Guarantee the Very Same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Must Be Used With LustreKote Paint to Draw out Its
    Real Color.
MonoKote Trim Sheet (Gloss): TOPQ4106
MonoKote (Gloss): TOPQ0207
MonoKote is a Heat Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be used on top of, however not under MonoKote.)
**Temperature Level Ranges: Flat MonoKote Uses a Higher Temperature Level to Apply.
    Connecting to Wood: 240 - 275°F (triggering the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F
TECH
KEEP IN MIND: The qualities of the flat MonoKote differ somewhat from
standared MonoKote covering:
Flat MonoKote needs higher temperatures to use than basic
MonoKote since of the flat surface. In addition to the higher temperature
settings, this covering might require the iron to be in contact with
the covering and wood somewhat longer than the basic finish.
If this covering is used too loosely, it might be challenging to get
a tight shrink with this item. Also, when used loosely, it
might become impossible to remove any wrinkles that might appear.