JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Top Flite MonoKote Flat Dove Gray 6' (Top Flite TOPQ0511 | TOPQ0511)

Model: Top Flite TOPQ0511
Dist. #: TOPQ0511   SKU: TOPQ0511

Be the first to review this product. (Write Review)

Out of stock

List Price:  $23.99
Price:  $15.99
You Save:  $8 (33%)

This item will earn you 16 reward point(s).
16 points = $0.32 off your next order. Learn More

Updated on Feb 25, 2020 08:30:55 AM

MonoKote Flat Dove Gray 6'...
MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Affordable,
Easy, Clean, when Compared to "old fashioned" Coverings, Quick To Use.

For great covering ideas and to insure an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Triggers When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
Fuelproof and Water resistant
More powerful and Lighter Than Conventional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

One (6' x 26") Roll of Flat Dove Gray Covering w/Instruction Sheet

Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

Paints, Trim Sheets, EconoKote and Different Lots of MonoKote Might
    Vary A little In Color In Between Production Runs of These Products.
If Using 3 or More Rolls of the Same Color, it is Recommended to
    Use a 25' Roll (TOPQ1521) To Guarantee the Same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Must Be Utilized With LustreKote Paint to Highlight Its
    Real Color.
MonoKote (Gloss): TOPQ0211
MonoKote is a High Temperature Covering, NOT For Usage Straight On Foam
EconoKote IS For Usage Straight On Foam, Use the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be used on top of, however not under MonoKote.)
**Temperature Level Varies: Flat MonoKote Uses a Higher Temperature Level to Apply.
    Attaching to Wood: 240 - 275°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Optimum Shrinkage: 270 - 350°F
NOTE: The characteristics of the flat MonoKote vary slightly from
standared MonoKote covering:
Flat MonoKote requires greater temperature levels to use than standard
MonoKote since of the flat surface. In addition to the greater temp
settings, this covering might require the iron to be in contact with
the covering and wood slightly longer than the standard finish.
If this covering is applied too loosely, it might be challenging to get
a tight shrink with this product. Likewise, when applied loosely, it
might become difficult to remove any wrinkles that might appear.
Visual Parts Finder