Top Flite MonoKote Cream 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Affordable,
Easy, Clean, and When Compared with "old fashioned" Coverings, Quick To Use.

For great covering ideas and to insure an expert finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Triggers When Heat is Applied
Shrinks to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Water resistant
More powerful and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Cream Covering
One Direction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Various Great deals of MonoKote Might
    Vary A little In Color Between Production Runs of These Products.
If Utilizing 3 or More Rolls of the Exact same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1212) To Guarantee the Exact same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Need to Be Utilized With LustreKote Paint to Draw out Its
    Real Color.
MonoKote Trim Sheet: NONE
MonoKote Flat: TOPQ0512
MonoKote is a High Temperature Covering, NOT For Usage Straight On Foam
EconoKote IS For Usage Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be utilized on top of, however not under MonoKote.)
Temperature Ranges:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F

Regularly purchased with the thing that you are currently checking out.



This is a Master Airscrew Injection-Molded Fiberglass Filled Nylon Propeller.
Excellent for Any Kind of Application, from
Training and Sport Flying to Major Competition.

FEATURES:
NASA Airfoils and Constant-Pitch Styles enable this Prop to
    deliver more Thrust at Lower RPM.
The Latest in Engineering Innovation utilized for this Upgraded Design.
Lower Sound and Accurate Balance
Readily available in a Wide Array of Sizes to Fit Every Application.
Propeller is completely fuel-proof.

CONSISTS OF:
One Black 9x6 Fiberglass/Nylon Prop

SPECS:
Center Hole Diameter: 1/4" approx.
Propeller Diameter: 9"
Prop Pitch: 6"

NEEDS:
Depending on the engine crankshaft size, the prop might have to
    be reamed to a larger size utilizing GPMQ5005 (SAE) or
    GPMQ5007 (Metric).

COMMENTS:
Four-stroke engines are normally greater torque engines and must
    utilize the larger props indicated in the range.
Recommended prop varieties will differ depending on your specific engine
    and airplane.
The Chart below represents average prop use and should be utilized as
    Only a General Guideline. Constantly refer to the producer's
    guidelines consisted of with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A