Top Flite MonoKote Cream 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Affordable,
Easy, Clean, when Compared with "old made" Coverings, Quick To Use.

For great covering ideas and to guarantee an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive Activates When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Waterproof
More powerful and Lighter Than Conventional Silk and Dope Coverings
May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Cream Covering
One Direction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
If Utilizing 3 or More Rolls of the Very same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1212) To Make sure the Very same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Need to Be Utilized With LustreKote Paint to Bring Out Its
    True Color.
MonoKote Trim Sheet: NONE
MonoKote Flat: TOPQ0512
MonoKote is a Heat Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote may be used on top of, but not under MonoKote.)
Temperature level Varies:
    Connecting to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F

Regularly purchased with the product that you are currently reviewing.



This is a Master Airscrew Injection-Molded Fiberglass Filled Nylon Propeller.
Excellent for Any Kind of Application, from
Training and Sport Flying to Major Competition.

FEATURES:
NASA Airfoils and Constant-Pitch Designs enable this Prop to
    deliver more Thrust at Lower RPM.
The Newest in Engineering Technology used for this Updated Design.
Lower Noise and Accurate Balance
Readily available in a Wide Array of Sizes to Fit Every Application.
Propeller is completely fuel-proof.

INCLUDES:
One Black 9x6 Fiberglass/Nylon Prop

SPECS:
Center Hole Size: 1/4" approx.
Propeller Size: 9"
Prop Pitch: 6"

NEEDS:
Depending on the engine crankshaft size, the propeller may need to
    be reamed to a bigger size utilizing GPMQ5005 (SAE) or
    GPMQ5007 (Metric).

REMARKS:
Four-stroke engines are normally greater torque engines and must
    use the larger props indicated in the range.
Recommended prop varieties will vary depending on your specific engine
    and airplane.
The Chart below represents average prop usage and ought to be used as
    Just a General Standard. Always refer to the maker's
    directions consisted of with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A