Top Flite MonoKote Black 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,
Easy, Clean, and When Compared to "old made" Coverings, Quick To Use.

For fantastic covering concepts and to guarantee an expert surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive is Triggered When Heat is Applied
Shrinks to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Water resistant
More powerful and Lighter Than Standard Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Black Covering
One Guideline Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Great deals of MonoKote May
    Vary A little In Color Between Production Runs of These Products.
If Utilizing 3 or More Rolls of the Exact same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1208) To Guarantee the Exact same Dye Lot for the Entire
    Model Being Covered.
LustreKote Guide Must Be Used With LustreKote Paint to Highlight Its
    True Color.
MonoKote Trim Sheet: TOPQ4109
MonoKote Flat: TOPQ0508
MonoKote is a High Temperature level Covering, NOT For Usage Directly On Foam
EconoKote IS For Usage Directly On Foam, Utilize the Following:
EconoKote Covering: TOPQ2608-TOPQ2612
    (EconoKote may be used on top of, however not under MonoKote.)
Temperature level Ranges:
    Connecting to Wood: 215 - 240°F (activating the glue)
    Partial Shrinkage: 230 - 270°F
    Optimum Shrinkage: 270 - 350°F

The listed below thing also pairs truly well with the thing being discussed.



Turn scrap MonoKote (or any covering) into perfectly matched and perfectly
sized stripes. Top Flite's Smart Stripe Cutting Tool gets rid of the requirement for
ever having to purchase striping tape again!
NOTE-THE BLADES ARE TAPED TO THE COVER OR BOTTOM FOR SAFETY.

FEATURES:
Makes fuelproof stripes that stick and remain stuck
Ingenious cutting system tracks perfectly straight and precision
    stainless-steel modification enables micro-fine width control
Makes stripes as slim as 1/64", as broad as 5-1/4"
Has one #11 blade, however may also use #10 and #12 blades
5-year restricted warranty

CONSISTS OF:
One Smart Stripe Cutting Tool
One #11 Blade
One Photo-Illustrated Guideline Sheet with Part Number Listing.

COMMENTS:
Replacement Components: Roller: TOPR2425
Blades: HCAR0211
OTHER REPLACEMENT PARTS OFFERED THROUGH EXCELLENT AIRPLANES DIRECTLY.
2-
strp002 upright 1- strp001 base
1-
strp003 left blade holder 1-
scrw030 1/4-20x1" hex head bolt
1-
strp004 right blade holder 1-
strpp01 directions
1-
nylon107 threaded insert 1-
strpd01 decal
1-
hrdwd023 wood roller
1-
metal068 dead pin
1-
scrw106 1/4-20 roller knob
1-
scrw105 1/4-32x8" threaded shaft
1-
knob001 knob for threaded shaft
2-
scrw107 4-40x3/4" screw w/ knob
2-
scrw102 6-32x1/4"
1-
blade08 #11 blade
2-
nuts002 4-40 hex nut
1-
nylon108 1/4" unthreaded nylon hex nut
4-
scrw047 #6x1/2' sheet metal screw
2-
wshr005 #4 flat washer