Top Flite MonoKote Black 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Economical,
Easy, Clean, and When Compared with "old made" Coverings, Quick To Use.

For fantastic covering ideas and to insure a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive is Activated When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Complete
Fuelproof and Water resistant
Stronger and Lighter Than Standard Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Black Covering
One Direction Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Great deals of MonoKote Might
    Vary Slightly In Color In between Production Runs of These Products.
If Using 3 or More Rolls of the Very same Color, it is Suggested to
    Utilize a 25' Roll (TOPQ1208) To Make sure the Very same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Need to Be Used With LustreKote Paint to Draw out Its
    Real Color.
MonoKote Trim Sheet: TOPQ4109
MonoKote Flat: TOPQ0508
MonoKote is a High Temperature level Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2608-TOPQ2612
    (EconoKote may be utilized on top of, but not under MonoKote.)
Temperature level Ranges:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F

The below item likewise pairs truly well with the item being talked about.



Turn scrap MonoKote (or any covering) into perfectly matched and perfectly
sized stripes. Leading Flite's Smart Stripe Cutting Tool eliminates the requirement for
ever needing to buy striping tape again!
NOTE-THE BLADES ARE TAPED TO THE LID OR BOTTOM FOR SAFETY.

FEATURES:
Makes fuelproof stripes that stick and stay stuck
Ingenious cutting mechanism tracks perfectly straight and precision
    stainless-steel change allows for micro-fine width control
Makes stripes as narrow as 1/64", as wide as 5-1/4"
Features one #11 blade, but may also use #10 and #12 blades
5-year minimal service warranty

INCLUDES:
One Smart Stripe Cutting Tool
One #11 Blade
One Photo-Illustrated Direction Sheet with Part Number Listing.

COMMENTS:
Replacement Parts: Roller: TOPR2425
Blades: HCAR0211
OTHER REPLACEMENT PARTS AVAILABLE THROUGH GREAT AIRPLANES DIRECTLY.
2-
strp002 upright 1- strp001 base
1-
strp003 left blade holder 1-
scrw030 1/4-20x1" hex head bolt
1-
strp004 right blade holder 1-
strpp01 instructions
1-
nylon107 threaded insert 1-
strpd01 decal
1-
hrdwd023 wood roller
1-
metal068 dead pin
1-
scrw106 1/4-20 roller knob
1-
scrw105 1/4-32x8" threaded shaft
1-
knob001 knob for threaded shaft
2-
scrw107 4-40x3/4" screw w/ knob
2-
scrw102 6-32x1/4"
1-
blade08 #11 blade
2-
nuts002 4-40 hex nut
1-
nylon108 1/4" unthreaded nylon hex nut
4-
scrw047 #6x1/2' sheet metal screw
2-
wshr005 #4 flat washer