Thunder Tiger Throttle Servo And Receiver Tray Raptor G4/E820

This is a replacement Thunder Tiger Throttle Servo & Receiver Tray, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Numerous others have actually bought this thing along with the thing that you are currently reviewing.



This is a replacement Thunder Tiger Canopy Bracket, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Numerous others have actually bought this thing along with the thing that you are currently reviewing.



This is a replacement Thunder Tiger Canopy Spacer, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

This is a amazing enhancement to the thing currently being talked about.

Autorotation Gear 108T Raptor G4/E820

This is a replacement Thunder Tiger 108 Tooth Autorotation Gear, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Below is another thing that compliments the thing being talked about.



This is the Front Tail Bevel Gear Set for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of nylon

CONSISTS OF:
Two Front Tail Bevel Gears with Pin and Set Screw

NEEDS:
Installing in heli following directions in manual

This is a amazing enhancement to the thing currently being talked about.



These are the Tail Control Rods for the
Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Metal construction

CONSISTS OF:
Two Tail Control Rods with Mounting Hardware

Below is a excellent thing that several others have actually purchased the exact same time.



This is a replacement Thunder Tiger 67.5mm Fixed Linkage Rod Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

This thing compliments the above talked about thing.



This is a replacement Thunder Tiger 74.5mm Fixed Linkage Rod Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Want another excellent thing to match the above stated thing?

Carbon Tail Support Set, E700

This is the Tail Support Set for the Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Constructed of carbon for strength and light weight

CONSISTS OF:
Two Carbon Tail Supports with Mounting Hardware

Below is another thing that compliments the thing being talked about.



This is the Gyro Tray for the Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Plastic construction, black in color

CONSISTS OF:
Gyro Tray

NEEDS:
Installing in heli following directions in manual

You will enjoy this thing if you have the thing previously discussed.



This is the set of 3D Flybarless Rotor Grip Levers for the
Thunder Tiger E320 Heli, TTRE0095.

FEATURES:
Refined natural surface aluminum

CONSISTS OF:
Two 3D Flybarless Rotor Grip Levers
4 3x5mm Screws

This thing compliments the above talked about thing.

Pv1609 Bearing 15X28x7 G4

This is a replacement Thunder Tiger 15x28x7mm Bearing Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Want another excellent thing to match the above stated thing?



These are the M3x8 Torx Screws used on the Thunder Tiger Raptor G4 Heli Series

FEATURES:
Steel construction, polished weapon metal gray in color

CONSISTS OF:
Twenty M3x8 Torx Screws

NEEDS:
2mm hex wrench, GPMR8011

SPECS:
Length: 8mm
Diameter: 3mm

Numerous others have actually bought this thing along with the thing that you are currently reviewing.



This is the Tail Support Bracket for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of aluminum

CONSISTS OF:
Tail Support Bracket with 3 Socket Head Cap Screws

NEEDS:
Installing on tail boom following directions in manual