Thunder Tiger Main Shaft Bearing Block G4.1/E820

This is the Main Shaft Bearing Block
for the Thunder Tiger Raptor E820 Helicopter.

FEATURES:
Aluminum construction with preinstalled steel ball bearing

CONSISTS OF:
Main Shaft Bearing Block with Ball Bearing

You will like this thing if you have the thing above discussed.



This is a replacement Thunder Tiger Canopy Bracket, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

Get this product to boost the one you read around.



This is a replacement Thunder Tiger Canopy Spacer, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

This product compliments the main item right here.

Autorotation Gear 108T Raptor G4/E820

This is a replacement Thunder Tiger 108 Tooth Autorotation Equipment, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

Frequently bought with the product that you are currently checking out.



This is the Front Tail Bevel Equipment Set for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of nylon

CONSISTS OF:
Two Front Tail Bevel Gears with Pin and Set Screw

REQUIRES:
Installing in heli following instructions in manual

You will like this thing if you have the thing above discussed.



These are the Tail Control Rods for the
Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Metal construction

CONSISTS OF:
Two Tail Control Rods with Mounting Hardware

This product compliments the main item right here.



This is a replacement Thunder Tiger 67.5mm Fixed Linkage Rod Set, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

Want another great product to enhance the above pointed out product?



This is a replacement Thunder Tiger 74.5mm Fixed Linkage Rod Set, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

Below is another product that compliments the product being gone over.

Carbon Tail Support Set, E700

This is the Tail Support Set for the Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Constructed of carbon for strength and lightweight

CONSISTS OF:
Two Carbon Tail Supports with Mounting Hardware

You will like this thing if you have the thing above discussed.



This is the Gyro Tray for the Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Plastic construction, black in color

CONSISTS OF:
Gyro Tray

REQUIRES:
Installing in heli following instructions in manual

Frequently bought with the product that you are currently checking out.



This is the set of 3D Flybarless Rotor Grip Levers for the
Thunder Tiger E320 Heli, TTRE0095.

FEATURES:
Sleek natural finish aluminum

CONSISTS OF:
Two 3D Flybarless Rotor Grip Levers
Four 3x5mm Screws

The listed below product also sets truly well with the product being gone over.

Pv1609 Bearing 15X28x7 G4

This is a replacement Thunder Tiger 15x28x7mm Bearing Set, and is meant for usage with the Thunder Tiger Raptor G4 Helicopters.

Want another great product to enhance the above pointed out product?



These are the M3x8 Torx Screws used on the Thunder Tiger Raptor G4 Heli Series

FEATURES:
Steel construction, polished gun metal gray in color

CONSISTS OF:
Twenty M3x8 Torx Screws

REQUIRES:
2mm hex wrench, GPMR8011

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm

Below is another product that compliments the product being gone over.



This is the Tail Support Bracket for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of aluminum

CONSISTS OF:
Tail Support Bracket with three Socket Head Cap Screws

REQUIRES:
Installing on tail boom following instructions in manual