Tekno RC ET48 2.0 1/8 4WD Competit

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]





Features

4mm CNC 7075 Aluminum Hard Anodized Lightened Chassis

Independent Servo/ESC Mount w/ Decoupled Radio Box/Battery Installs

CNC 7075 Shock Towers, Pivot Blocks, Motor Mount, and Caster Blocks

16mm Bore Fluid Filled Shocks with CNC Delrin Pistons and Guides

Rear Center and Arm Insert System w/ Adjustable Roll Center and Toe

3 Fluid Filled Easy Access Differentials

Trendsetting Low Profile Truggy Body Design

1-Piece Tall Wing Mount and Ultra-Lightweight Wing

Proven Tekno RC Sturdiness

All Metric Hardware





Overview
The Tekno ET48 2.0 1/8 Electric 4WD Off Roadway Truggy Set shares a lot of the parts and style elements very first introduced on the EB48 2.0 buggy. A main objective of this project was to reduce the extra parts needed to help keep drivers on the track or slamming at their preferred area. You will discover that quite a few of the parts you already have will deal with the ET48 2.0. Features from the 2.0 buggies have actually been rollovered, such as the industry-first suspension arms with built-in caster. This permits a longer total arm length, ideal front-end geometry and increased resilience. It has rear hubs that provide roll center adjustments by adjusting the axle height, and the active rear toe system has been rollovered also. A substantial quantity of time was invested in establishing the smoothest suspension bundle offered to make the truck a breeze to drive in the roughest conditions. The fast access differentials with increased volume have actually also been included to enhance consistency and effectiveness with very little upkeep time.

The ET48 2.0 body has an industry-first exposed front shock tower style in addition to a more truck-like appearance. The body is lighter, creates more downforce for increased steering reaction, flies through the air with higher ease and closer resembles a complete size lorry. Lastly, during testing, the body was found to last longer than "standard" truggy bodies.

NOTE: Finished kit shown in pictures is for illustrative functions only. See needed to finish list below for a list of products required to finish the model.









Specifications

Ball Bearings: Full set

Battery: Sold Separately

Body: Low profile

Brakes: Integral with ESC (ESC not included)

Battery charger: Sold Separately

Chassis: 4mm CNC 7075 difficult anodized aluminum

Completion Level: Set

Differential: 3 fluid filled, equipment type

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Power Type: Electric

Radio: Sold Separately

Receiver: Sold Separately

Scale: 1/8

Servos: Sold Separately

Shock Type: 16mm bore, oil-filled

Speed Control: Sold Separately

Spur Equipment: 44 tooth

Vehicle Type: Truggy