Tekno RC ET48 2.0 1/8 4WD Competit

.mediaFeature [cushioning:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]





Features

4mm CNC 7075 Aluminum Hard Anodized Lightened Chassis

Independent Servo/ESC Mount w/ Decoupled Radio Box/Battery Mounts

CNC 7075 Shock Towers, Pivot Blocks, Motor Mount, and Caster Blocks

16mm Bore Fluid Filled Shocks with CNC Delrin Pistons and Guides

Rear Hub and Arm Insert System w/ Adjustable Roll Center and Toe

3 Fluid Filled Easy Gain Access To Differentials

Trendsetting Low Profile Truggy Body Style

1-Piece Tall Wing Mount and Ultra-Lightweight Wing

Proven Tekno RC Sturdiness

All Metric Hardware





Overview
The Tekno ET48 2.0 1/8 Electric 4WD Off Roadway Truggy Kit shares a lot of the parts and style components very first introduced on the EB48 2.0 buggy. A main objective of this project was to reduce the additional parts required to help keep drivers on the track or bashing at their favourite spot. You will discover that many of the parts you currently have will deal with the ET48 2.0. Functions from the 2.0 buggies have been rollovered, such as the industry-first suspension arms with integrated caster. This permits a longer overall arm length, ideal front-end geometry and increased toughness. It has rear hubs that provide roll center adjustments by changing the axle height, and the active rear toe system has been rollovered also. A significant quantity of time was purchased establishing the best suspension plan available to make the truck a breeze to drive in the roughest conditions. The quick gain access to differentials with increased volume have likewise been consisted of to enhance consistency and effectiveness with very little upkeep time.

The ET48 2.0 body has an industry-first exposed front shock tower style in addition to a more truck-like look. The body is lighter, produces more downforce for increased steering response, flies through the air with higher ease and closer resembles a complete size automobile. Lastly, throughout screening, the body was found to last longer than "basic" truggy bodies.

NOTE: Finished set shown in images is for illustrative purposes only. See required to finish list listed below for a list of products needed to finish the model.









Specifications

Ball Bearings: Complete set

Battery: Sold Separately

Body: Low profile

Brakes: Integral with ESC (ESC not consisted of)

Charger: Sold Separately

Chassis: 4mm CNC 7075 difficult anodized aluminum

Completion Level: Kit

Differential: 3 fluid filled, gear type

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Power Type: Electric

Radio: Sold Separately

Receiver: Sold Separately

Scale: 1/8

Servos: Sold Separately

Shock Type: 16mm bore, oil-filled

Speed Control: Sold Separately

Spur Gear: 44 tooth

Lorry Type: Truggy