Tekno RC 5507 SCT410.3 1/10 4WD SC Truck

This is the Radio Controlled, Electric Powered, 1/10 scale
SCT410.3 4x4 Brief Course Truck Package from Tekno RC.

**Extra Technical Details Will Be Added When It Becomes Available.**

New features and enhancements consist of;
    Easier Diff Gears & 1-pc Composite Diff Cross Pin
Tapered Aluminum Driveshaft
Lightened Outdrives & Couplers
Angled Back Transmission w/Larger Bearings
Lowered Height Shock Towers
V2 Hinge Pin Brace for More Adjustability
More Durable Suspension Arms
Longer Rear Sway Bar
Requirement Droop Change Screws
LCG Lightened Motor Mount
M5 Stub Axles
Lightened Metal Clamping 12mm Hexes
Adjustable Stops on Spindles for more Exact Steering Control

FEATURES:
Chassis: CNC aluminum 0.16" (4mm) thick, anodized black in color
    with short front and rear overhang for much better bump handling and
    jump landing, adjustable front, center, and rear chassis braces for
    great tuning flex
Own: Four wheel aluminum shaft drive with CVDs with captured
    pins
Motor Mount: LCG lightened
Differentials: Bevel equipment
Bumpers: Front and rear
Shocks: Oil-filled 16mm bore difficult anodized with conical piston style
    for varied compression and rebound rates, 4mm diameter steel shafts
Shock Towers: CNC aluminum 0.16" (4mm) thick
Suspension: Adjustable long travel style with adjustable length rear
    arms, and adjustable front arm sweep and angle, front and rear sway
    bars
Steering: Ball bearing supported, narrow pivot posts, adjustable
    bump-steer and Ackerman, Ackerman describes the impact of the
    inside front wheel turning faster than the outdoors front wheel
    during turns
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the vehicle in relation to
    the chassis
Camber: Adjustable front and rear, camber describes the angle of the
    tops of the tires from vertical when seen from front or behind
    lorry
Battery Tray: 2.0x5.8" (50x148mm)

CONSISTS OF:
SCT410.3 4x4 Package with Shocks, Shock and Diff Oil, Decals and
    Guidelines

REQUIRES:
Radio: 2-channel with high torque steering servo
Motor: Short course brushless
Pinion Equipment: 11-30 tooth Tekno RC MOD1 TKR4171-TKR4190 recommended
    OR Tekno RC Traktion Drive/Electri-Clutch System (TKRC4306)
Electronic Speed Control: Suitable with picked motor
Battery: TWO LiPo
Battery Battery charger: Suitable with picked battery
Body: 1/10 scale short course
Wheels: Brief course type with 12mm hex
Tires: Short course
Structure and track equipment

SPECIFICATIONS:
Length: 20.87" (530mm)
Width: 11.65" (296mm)
Wheelbase: 12.7-13.2" (323-335mm)
Weight: 6.6pounds (3000g) prepared to run, roughly
Differential Ratio: F/R 10-40t, center 44t

COMMENTS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
6 8x16mm Fr, R & Ctr Diff 3 DTXC1585
2 5x11mm Front Transmission 1 DTXC1547
2 5x11mm Back Transmission 1 DTXC1547
2 10x15mm Back Hubs 1 DTXC1595
2 6x13mm Back Centers 1 DTXC1573
2 10x15mm Front Centers 1 DTXC1595
2 6x13mm Front Hubs 1 DTXC1573
4 6x10mm Steering 2 DTXC1561