Tekno RC 5507 SCT410.3 1/10 4WD SC Truck

This is the Radio Controlled, Electric Powered, 1/10 scale
SCT410.3 4x4 Short Course Truck Kit from Tekno RC.

**Extra Technical Info Will Be Added When It Appears.**

New functions and improvements include;
    Easier Diff Gears & 1-pc Composite Diff Cross Pin
Tapered Aluminum Driveshaft
Lightened Outdrives & Couplers
Angled Rear Gearbox w/Larger Bearings
Minimized Height Shock Towers
V2 Hinge Pin Brace for More Adjustability
More Resilient Suspension Arms
Longer Rear Sway Bar
Requirement Droop Change Screws
LCG Lightened Motor Mount
M5 Stub Axles
Lightened Metal Securing 12mm Hexes
Adjustable Stops on Spindles for more Precise Steering Control

FEATURES:
Chassis: CNC aluminum 0.16" (4mm) thick, anodized black in color
    with short front and rear overhang for much better bump handling and
    jump landing, adjustable front, center, and rear chassis braces for
    great tuning flex
Drive: 4 wheel aluminum shaft drive with CVDs with recorded
    pins
Motor Mount: LCG lightened
Differentials: Bevel gear
Bumpers: Front and rear
Shocks: Oil-filled 16mm bore tough anodized with conical piston design
    for diverse compression and rebound rates, 4mm size steel shafts
Shock Towers: CNC aluminum 0.16" (4mm) thick
Suspension: Adjustable long travel design with adjustable length back
    arms, and adjustable front arm sweep and angle, front and rear sway
    bars
Steering: Ball bearing supported, narrow pivot posts, adjustable
    bump-steer and Ackerman, Ackerman explains the impact of the
    inside front wheel turning faster than the outside front wheel
    during turns
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the automobile in relation to
    the chassis
Camber: Adjustable front and back, camber describes the angle of the
    tops of the tires from vertical when viewed from front or behind
    lorry
Battery Tray: 2.0x5.8" (50x148mm)

CONSISTS OF:
SCT410.3 4x4 Kit with Shocks, Shock and Diff Oil, Decals and
    Instructions

NEEDS:
Radio: 2-channel with high torque steering servo
Motor: Short course brushless
Pinion Gear: 11-30 tooth Tekno RC MOD1 TKR4171-TKR4190 suggested
    OR Tekno RC Traktion Drive/Electri-Clutch System (TKRC4306)
Electronic Speed Control: Compatible with chosen motor
Battery: 2S LiPo
Battery Charger: Compatible with chosen battery
Body: 1/10 scale short course
Wheels: Short course type with 12mm hex
Tires: Short course
Building and track equipment

SPECIFICATIONS:
Length: 20.87" (530mm)
Width: 11.65" (296mm)
Wheelbase: 12.7-13.2" (323-335mm)
Weight: 6.6pounds (3000g) all set to run, approximately
Differential Ratio: F/R 10-40t, center 44t

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Area Qty. Bearing Set
6 8x16mm Fr, R & Ctr Diff 3 DTXC1585
2 5x11mm Front Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 10x15mm Rear Hubs 1 DTXC1595
2 6x13mm Rear Centers 1 DTXC1573
2 10x15mm Front Centers 1 DTXC1595
2 6x13mm Front Hubs 1 DTXC1573
4 6x10mm Steering 2 DTXC1561