Tekin RS Pro 1S Black Edition BL Sensored/Sensrlss ESC

• ULR: Ultra Low Resistance Style


• Specifically Created for Specification and Stock Racing


• QuickTune^™ One Touch Programs


• Adjustable Throttle and Brake Frequencies *


• High Voltage Programmable BEC *


• HotWire^™ Programs Port *


• Data Logging Ability *


• Sensing unit Checker


• On-Board Temperature Level Indicator


• ESC Self Diagnostics with Error Codes


• Fully Proportional Forward/Brake/Reverse


• Brushless and Brushed Motor Drive


• Sensored or Sensorless Operation


• LiPo Safe with Custom-made Voltage Cutoffs


• Sensing Unit Plug for Accurate Commutation


• Lightweight Chassis Style


• HDAC: High Density Copper PCB's


• Ultra-smooth and Accurate Throttle and Braking Control


• *needs HotWire sold separately

The RS PRO is back! This RS PRO Black Edition uses both hardware and software advances just recently established for our newest ESC lineup. With its industry-leading Ultra Low Resistance you can be sure that your motor is getting all the power you can give it. More power, smooth control and reliability you can depend on: the RS PRO Black Edition is crafted for performance. Abilities such as Data Logging and HotWire 3.0 Bluetooth Connection enable you fine tune your system and gain an advantage over the competition.

The RS PRO Black Edition was specifically developed for 1S-2S Specification Classes and Drag Racing to make the most of the ULR circuit style. ULR FlexWire is included with every Black Edition ESC. Combine the RS PROs with a SPEC-R motor for the supreme Ultra Low Resistance system.

For 1/10 scale 2WD/4WD Buggy and Arena Truck and Modified Touring Car we suggest the RSX Modified ESC as these setups tend to run at higher temperature levels. The billet housing and fan shroud on the RSX provide enough cooling.

ON BOARD Quicktune PROGRAMMABLE FEATURES:

• DB - Drag Brake (13 steps)


• BS - Brake / Reverse Strength (13 steps)


• LM - Torque Limiter (7 steps)


• NW - Neutral Width (13 steps)


• TP - Timing Profiles 5 Presets - 2 Custom-made


• MT - Motor Type


• Brushless Modes: FWD Just / FWD-REV / FWD-REV Delay / FWD-REV Delay REV Motor Instructions
  
• Brushed Modes: FWD Just / FWD-REV / FWD-REV Delay


• VC - Voltage Cutoffs: TWO, 3S and Custom-made


• Extensive Tuning by means of Tekin HotWire (sold separately)




Requirements





• Controls: Forward/Brake/Reverse
  
• Input Voltage
  
  • RS Pro: 1-3S LiPo / 4-9S NiMH-NiCD*
    
  • RS Pro 1-S: 1st LiPo ONLY / FOUR NiMH-NiCD
  
  
• Motor Limitation Brushless Mode 2S: 36mm Can - 2-Pole
  
• Motor Limitation Brushless Mode 3S: 36mm Can - 2-Pole
  
• Motor Limitation Brushed Two: 36mm Can - 540 & 550
  
• Motor Limitation Brushed Three: 36mm Can - 540 & 550
  
• Amperage: 480Amps per stage**
  
• ON Resistance: .000096ohm**
  
• BEC: 6.0 / 7.4V @ 5.5amps
  
• Weight: 1.23oz / 35g
  
• Measurements: 1.0 x 1.3 x .68in / 24.5 x 33 x 17.25mm
  
• *one LiPo Operation needs a different booster or receiver battery
  
• **per producer specs