Tekin RS Pro 1S Black Edition BL Sensored/Sensrlss ESC

• ULR: Ultra Low Resistance Style


• Particularly Designed for Specification and Stock Racing


• QuickTune^™ One Touch Shows


• Adjustable Throttle and Brake Frequencies *


• High Voltage Programmable BEC *


• HotWire^™ Shows Port *


• Data Logging Ability *


• Sensor Checker


• On-Board Temperature Level Indicator


• ESC Self Diagnostics with Error Codes


• Fully Proportional Forward/Brake/Reverse


• Brushless and Brushed Motor Drive


• Sensored or Sensorless Operation


• LiPo Safe with Custom Voltage Cutoffs


• Sensor Plug for Accurate Commutation


• Lightweight Chassis Style


• HDAC: High Density Copper PCB's


• Ultra-smooth and Accurate Throttle and Braking Control


• *needs HotWire offered individually

The RS PRO is back! This RS PRO Black Edition makes use of both software and hardware advances recently developed for our newest ESC lineup. With its industry-leading Ultra Low Resistance you can be sure that your motor is getting all the power you can offer it. More power, smooth control and reliability you can count on: the RS PRO Black Edition is engineered for performance. Capabilities such as Data Logging and HotWire 3.0 Bluetooth Connectivity permit you fine tune your system and get a benefit over the competition.

The RS PRO Black Edition was particularly created for 1S-2S Specification Classes and Drag Racing to maximize the ULR circuit design. ULR FlexWire is included with every Black Edition ESC. Pair the RS PROs with a SPEC-R motor for the supreme Ultra Low Resistance system.

For 1/10 scale 2WD/4WD Buggy and Stadium Truck and Modified Touring Car we recommend the RSX Modified ESC as these setups tend to run at greater temperatures. The billet housing and fan shroud on the RSX provide sufficient cooling.

ON BOARD Quicktune PROGRAMMABLE FEATURES:

• DB - Drag Brake (13 actions)


• BS - Brake / Reverse Strength (13 actions)


• LM - Torque Limiter (7 actions)


• NW - Neutral Width (13 actions)


• TP - Timing Profiles 5 Presets - 2 Custom


• MT - Motor Type


• Brushless Modes: FWD Just / FWD-REV / FWD-REV Hold-up / FWD-REV Hold-up REV Motor Instructions
  
• Brushed Modes: FWD Just / FWD-REV / FWD-REV Hold-up


• VC - Voltage Cutoffs: 2S, three and Custom


• Extensive Tuning via Tekin HotWire (offered individually)




Specs





• Controls: Forward/Brake/Reverse
  
• Input Voltage
  
  • RS Pro: 1-3S LiPo / 4-9S NiMH-NiCD*
    
  • RS Pro 1-S: 1S LiPo ONLY / 4S NiMH-NiCD
  
  
• Motor Limit Brushless Mode 2S: 36mm Can - 2-Pole
  
• Motor Limit Brushless Mode 3S: 36mm Can - 2-Pole
  
• Motor Limit Brushed Two: 36mm Can - 540 & 550
  
• Motor Limit Brushed Three: 36mm Can - 540 & 550
  
• Amperage: 480Amps per phase**
  
• ON Resistance: .000096ohm**
  
• BEC: 6.0 / 7.4V @ 5.5amps
  
• Weight: 1.23oz / 35g
  
• Dimensions: 1.0 x 1.3 x .68in / 24.5 x 33 x 17.25mm
  
• *1st LiPo Operation needs a different booster or receiver battery
  
• **per producer specifications