Tekin RS Pro 1S Black Edition BL Sensored/Sensrlss ESC

• ULR: Ultra Low Resistance Design


• Specifically Developed for Spec and Stock Racing


• QuickTune^™ One Touch Shows


• Adjustable Throttle and Brake Frequencies *


• High Voltage Programmable BEC *


• HotWire^™ Shows Port *


• Data Logging Ability *


• Sensing unit Checker


• On-Board Temperature Level Indicator


• ESC Self Diagnostics with Mistake Codes


• Fully Proportional Forward/Brake/Reverse


• Brushless and Brushed Motor Drive


• Sensored or Sensorless Operation


• LiPo Safe with Customized Voltage Cutoffs


• Sensor Plug for Exact Commutation


• Lightweight Chassis Design


• HDAC: High Density Copper PCB's


• Ultra-smooth and Exact Throttle and Braking Control


• *needs HotWire sold separately

The RS PRO is back! This RS PRO Black Edition makes use of both hardware and software advances just recently developed for our newest ESC lineup. With its industry-leading Ultra Low Resistance you can be sure that your motor is getting all the power you can give it. More power, smooth control and reliability you can count on: the RS PRO Black Edition is engineered for efficiency. Abilities such as Data Logging and HotWire 3.0 Bluetooth Connectivity permit you tweak your system and gain a benefit over the competition.

The RS PRO Black Edition was specifically created for 1S-2S Spec Classes and Drag Racing to take full advantage of the ULR circuit design. ULR FlexWire is included with every Black Edition ESC. Match the RS PROs with a SPEC-R motor for the supreme Ultra Low Resistance system.

For 1/10 scale 2WD/4WD Buggy and Stadium Truck and Modified Touring Automobile we suggest the RSX Modified ESC as these setups tend to perform at higher temperatures. The billet housing and fan shroud on the RSX offer enough cooling.

ON BOARD Quicktune PROGRAMMABLE INCLUDES:

• DB - Drag Brake (13 steps)


• BS - Brake / Reverse Strength (13 steps)


• LM - Torque Limiter (7 steps)


• NW - Neutral Width (13 steps)


• TP - Timing Profiles 5 Presets - 2 Customized


• MT - Motor Type


• Brushless Modes: FWD Only / FWD-REV / FWD-REV Hold-up / FWD-REV Hold-up REV Motor Direction
  
• Brushed Modes: FWD Only / FWD-REV / FWD-REV Hold-up


• VC - Voltage Cutoffs: 2S, three and Customized


• Comprehensive Tuning through Tekin HotWire (sold separately)




Requirements





• Controls: Forward/Brake/Reverse
  
• Input Voltage
  
  • RS Pro: 1-3S LiPo / 4-9S NiMH-NiCD*
    
  • RS Pro 1-S: One LiPo ONLY / 4S NiMH-NiCD
  
  
• Motor Limit Brushless Mode 2S: 36mm Can - 2-Pole
  
• Motor Limit Brushless Mode 3S: 36mm Can - 2-Pole
  
• Motor Limit Brushed 2S: 36mm Can - 540 & 550
  
• Motor Limit Brushed 3S: 36mm Can - 540 & 550
  
• Amperage: 480Amps per phase**
  
• ON Resistance: .000096ohm**
  
• BEC: 6.0 / 7.4V @ 5.5amps
  
• Weight: 1.23oz / 35g
  
• Dimensions: 1.0 x 1.3 x .68in / 24.5 x 33 x 17.25mm
  
• *1st LiPo Operation needs a separate booster or receiver battery
  
• **per manufacturer specs