Tamiya Rc Subaru Wrx Sti Kit, 1/10 Scale, 4Wd, Brushed, W/ A Tt - 02 Ch

**Additional Technical Info Will Be Included When It Appears.**

This is the 1/10 scale, Tamiya electrical powered, radio managed,
Subaru WRX STI On-Road Race Car Kit.

FEATURES:
Chassis: TT-02 ABS resin bathtub type decreases contact with the road
    upright assembly can be altered to provide chassis an extra 4mm of
    travel for Rally racing
Drive: 4 wheel, shaft driven, with dogbones
Motor: Tamiya Torque Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless suitable
Differential: Equipment type
Wheels: Nylon construction, 10 spoke 12mm hex, 1.02" (26mm)
    large 2.00" (51mm) diameter, gun metal gray in color
Tires: Treaded rubber with foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate with plastic side mirrors and rear wing
Camber: Non-adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the automobile in relation to the
    chassis
Steering: Bellcrank type
Bumper: Front, urethane

CONSISTS OF:
Tamiya Subaru WRX STI with 540 Brushed Motor, Tires,
    Wheels, Clear Body, Foam Inserts, ESC, Decals and Recommendations

REQUIRES:
Radio: 2-channel with high speed guiding servo
Battery: 7.2V NiMH
Battery Battery charger: To match chosen battery
Building and track devices

SPECS:
Car-
Wheelbase: 17.4" (441mm)
Length: 18.6" (472mm)
    Body-
Length:
Width:
Height:

COMMENTS:
To upgrade to ball bearings order;
    Qty. Size Location Qty Bearing Set
2 5x11mm Spur Equipment 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
2 8x12mm Differential 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535