Tamiya Nissan Skyline GT-R (R32) TT02D Drift Spec

**Additional Technical Information Will Be Added When It Becomes Available.**

This is the 1/10 scale, electric powered, radio managed,
Tamiya TT02D Drift Specification Kit with the Nissan Horizon GR-R (R-32) Body.

FEATURES:
Chassis: Plastic, bath tub type with skid shaped underside to
    minimize contact with the road surface area
Drive: 4 wheel, shaft driven
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE-02S
Differential: Equipment type
Tires: Super Driftech resin 0.94" (24mm) broad
Wheels: Matte surface metal plated, 1.9" size (48.2mm), 0.94"
    (24mm) broad, 12mm hex, +2° offset
Ball Bearings: Shielded
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body

Camber: Non-adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind lorry
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the car in relation to the
    chassis
Steering: Bellcrank type
Body: Clear untrimmed polycarbonate Nissan Horizon GT-R (R32) body
    decals and window masks
Bumper: Front, foam

CONSISTS OF:
Tamiya TT02D Drift Specification Chassis, with 540 Brushed Motor, Drift Tires,
    Clear Body, 70 tooth Spur Equipment, 22 tooth Pinion, ESC, Decals,
    Window Masks, Recommendations and Wheels

REQUIRES:
Radio: 2-channel with high speed guiding servo
Battery: 7.2V NiMH
Battery Charger: To match selected battery
Structure and track devices

SPECIFICATIONS:
Specifications such as ended up size and weight of lorry not provided
    by manufacturer
    Body
Length:
Width:
Height:

REMARKS:
For replacement, Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 5x11mm Spur Equipment 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
4 8x12mm Differential 2 DTXC1581
2 8x12mm Back Diff Assembly 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Back Uprights 1 DTXC1535