Tamiya Nissan Skyline GT-R (R32) TT02D Drift Spec

**Additional Technical Details Will Be Added When It Appears.**

This is the 1/10 scale, electric powered, radio controlled,
Tamiya TT02D Drift Specification Set with the Nissan Horizon GR-R (R-32) Body.

FEATURES:
Chassis: Plastic, bathtub type with skid shaped underside to
    minimize contact with the road surface area
Drive: 4 wheel, shaft driven
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE-02S
Differential: Gear type
Tires: Super Driftech resin 0.94" (24mm) broad
Wheels: Matte finish metal plated, 1.9" size (48.2mm), 0.94"
    (24mm) broad, 12mm hex, +2° balanced out
Ball Bearings: Protected
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body

Camber: Non-adjustable, camber describes the angle of the tops of the
    tires from vertical when viewed from front or behind automobile
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the vehicle in relation to the
    chassis
Steering: Bellcrank type
Body: Clear untrimmed polycarbonate Nissan Horizon GT-R (R32) body
    decals and window masks
Bumper: Front, foam

CONSISTS OF:
Tamiya TT02D Drift Specification Chassis, with 540 Brushed Motor, Drift Tires,
    Clear Body, 70 tooth Spur Gear, 22 tooth Pinion, ESC, Decals,
    Window Masks, Instructions and Wheels

REQUIRES:
Radio: 2-channel with high speed guiding servo
Battery: 7.2V NiMH
Battery Battery charger: To match picked battery
Structure and track equipment

SPECS:
Specs such as finished size and weight of automobile not provided
    by maker
    Body
Length:
Width:
Height:

REMARKS:
For replacement, Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
4 8x12mm Differential 2 DTXC1581
2 8x12mm Back Diff Assembly 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Back Uprights 1 DTXC1535