Tamiya Nissan Skyline GT-R (R32) TT02D Drift Spec

**Additional Technical Info Will Be Added When It Appears.**

This is the 1/10 scale, electric powered, radio controlled,
Tamiya TT02D Drift Spec Package with the Nissan Skyline GR-R (R-32) Body.

FEATURES:
Chassis: Plastic, bathtub type with skid shaped underside to
    minimize contact with the roadway surface area
Drive: Four wheel, shaft driven
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE-02S
Differential: Equipment type
Tires: Super Driftech resin 0.94" (24mm) broad
Wheels: Matte surface metal plated, 1.9" size (48.2mm), 0.94"
    (24mm) broad, 12mm hex, +2° balanced out
Ball Bearings: Shielded
Suspension: Fully independent double wishbone
Shocks: CVA Super Mini oil-filled plastic body

Camber: Non-adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the automobile in relation to the
    chassis
Steering: Bellcrank type
Body: Clear untrimmed polycarbonate Nissan Skyline GT-R (R32) body
    decals and window masks
Bumper: Front, foam

INCLUDES:
Tamiya TT02D Drift Spec Chassis, with 540 Brushed Motor, Drift Tires,
    Clear Body, 70 tooth Spur Equipment, 22 tooth Pinion, ESC, Decals,
    Window Masks, Instructions and Wheels

REQUIRES:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Charger: To match picked battery
Structure and track devices

SPECIFICATIONS:
Specifications such as finished size and weight of vehicle not supplied
    by maker
    Body
Length:
Width:
Height:

COMMENTS:
For replacement, Ball Bearings use:
    Qty. Size Location Qty. Bearing Set
2 5x11mm Spur Equipment 1 DTXC1547
2 5x11mm Driveshaft 1 DTXC1547
4 8x12mm Differential 2 DTXC1581
2 8x12mm Rear Diff Assembly 1 DTXC1581
2 5x10mm Front Uprights 1 DTXC1535
2 5x10mm Rear Uprights 1 DTXC1535