Tamiya Rc Motorized Support Legs

This is an Excellent Hop-Up to include Realism to your Tamiya King Hauler kit.

INCLUDES:
2 AA battery cases
One RS-29 motor
2 battery case connectors (these are used to link the 2 battery
    cases)
One battery terminal A
One battery terminal B
One tube of silicone grease (¼oz for the equipments)
One coupler plate A
One servo plate
One switch plate
One worm gear (acts sort of like a pinion)
One 28 teeth / 12 teeth counter gear
One 36 teeth / 10 teeth counter gear
One 40 tooth gear
2 return springs
One inner spring
4 rack springs
One 2x67mm threaded shaft
One 2x50mm threaded shaft
One ¾" x 4¾" double sided tape
One 20x20mm double sided tape
One shift gate (used on the transmitter as a guide)
Three nylon adjusters (aka 4mm ball cups)
One 5x40mm rubber tubing
One 4-way wrench
2 metal racks
2 joint cups
2 metal rack pinion
2 pinion shaft
2 5mm washers
2 5x8mm bronze bushings
2 3x7mm bronze bushings
One drive shaft
One brass hex center
One hex wrench
One brass rod nut
One ON/OFF switch
2 coupler nuts
2 4mm ball connectors
2 4mm e-ring
4 spring pins
4 3x3mm grub screw (aka hex screw)
2 2mm e-rings
2 2mm washers
Five 2.5x8mm socket head cap screws
Nine 2x8mm screws
Thirteen 2x8mm screws
Six 2mm nuts
4 3x10mm flanged screws
2 3mm nuts
4 3x6mm flat head screws
2 3x8mm screws
Three 3x8mm self tapping screws
2 gear box halves (Black molded nylon)
One trailer hitch (nylon)
One hitch plate (nylon)
2 nylon leg guides
2 nylon swivel arms
2 nylon mounting arms

NEEDS:
One Requirement Servo and 4 "AA" size batteries.