Tamiya Rc Motorized Support Legs

This is a Great Hop-Up to include Realism to your Tamiya King Hauler kit.

INCLUDES:
Two AA battery cases
One RS-29 motor
Two battery case connectors (these are utilized to link the 2 battery
    cases)
One battery terminal A
One battery terminal B
One tube of silicone grease (¼oz for the gears)
One coupler plate A
One servo plate
One switch plate
One worm equipment (acts sort of like a pinion)
One 28 teeth / 12 teeth counter equipment
One 36 teeth / 10 teeth counter equipment
One 40 tooth equipment
Two return springs
One inner spring
Four rack springs
One 2x67mm threaded shaft
One 2x50mm threaded shaft
One ¾" x 4¾" double sided tape
One 20x20mm double sided tape
One shift gate (utilized on the transmitter as a guide)
3 nylon adjusters (aka 4mm ball cups)
One 5x40mm rubber tubing
One 4-way wrench
Two metal racks
Two joint cups
Two metal rack pinion
Two pinion shaft
Two 5mm washers
Two 5x8mm bronze bushings
Two 3x7mm bronze bushings
One drive shaft
One brass hex center
One hex wrench
One brass rod nut
One ON/OFF switch
Two coupler nuts
Two 4mm ball connectors
Two 4mm e-ring
Four spring pins
Four 3x3mm grub screw (aka hex screw)
Two 2mm e-rings
Two 2mm washers
5 2.5x8mm socket head cap screws
Nine 2x8mm screws
Thirteen 2x8mm screws
6 2mm nuts
Four 3x10mm flanged screws
Two 3mm nuts
Four 3x6mm flat head screws
Two 3x8mm screws
3 3x8mm self tapping screws
Two gear box halves (Black molded nylon)
One trailer hitch (nylon)
One hitch plate (nylon)
Two nylon leg guides
Two nylon swivel arms
Two nylon installing arms

NEEDS:
One Requirement Servo and Four "AA" size batteries.