Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery port set with wire.

FEATURES:
These are the white plastic male/female connectors more typically
called Kyosho/Tamiya connectors. They also include the wire
set up in the connector.

SPECS:
The wire ought to average about 3"-4" long. The wires are not the very same
length.

INCLUDES:
A Kyosho battery port with wire.
A Tamiya battery port with wire.

WAJ
11/21/93

Frequently gotten with the item that you are presently reviewing.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a safe connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

REQUIRES:
Soldering connectors onto wires

Frequently gotten with the item that you are presently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Offers a safe connection for battery and motor connections

CONSISTS OF:
Two 2-Pin Male Ultra Plug
Four short pieces of Black shrink tubing

REQUIRES:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

This is a wonderful addition to the item presently being gone over.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Battery charger w/Tamiya port and is planned for usage with 7.2V NiCd Stick Battery Packs.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capacity.  This charger is NOT suggested for charging NiMh Cells, or 7.2V batteries to be utilized for racing.  We suggest that you get a good peak charger instead for that purpose. 

You will love this product if you have the product just above pointed out.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Automobile Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are designed for usage on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Size: 2.5mm

Get this item to improve the one you are reading about.



This is the Male and Female Two Pin Battery Port
utilized on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic port
3 inches of wire

CONSISTS OF:
One male end
One female end

REQUIRES:
Soldering to choosen device

SPECIFICATIONS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This item compliments the main item right here.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001