Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery adapter set with wire.

FEATURES:
These are the white plastic male/female connectors more frequently
called Kyosho/Tamiya connectors. They also feature the wire
installed in the connector.

SPECS:
The wire needs to balance about 3"-4" long. The wires are not the very same
length.

INCLUDES:
A Kyosho battery adapter with wire.
A Tamiya battery adapter with wire.

WAJ
11/21/93

Frequently bought with the product that you are presently reviewing.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a protected connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

Frequently bought with the product that you are presently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Provides a protected connection for battery and motor connections

SUCHES AS:
2 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a amazing enhancement to the product presently being reviewed.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Battery charger w/Tamiya adapter and is intended for use with 7.2V NiCd Stick Battery Loads.  Approximate charge time could be anywhere from 2-4 Hours depending on battery capacity.  This battery charger is NOT advised for charging NiMh Cells, or 7.2V batteries to be used for racing.  We suggest that you get a good peak battery charger instead for that function. 

You will certainly like this thing if you have the thing earlier discussed.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 2.5mm

Get this product to improve the one you read around.



This is the Male and Female 2 Pin Battery Port
used on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic adapter
Two inches of wire

SUCHES AS:
One male end
One female end

NEEDS:
Soldering to choosen device

SPECS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This product praises the main item below.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Gets rid of the possibility of reverse polarity connections
Low resistance, compact size
Provides a protected connection for battery and motor connections on
    R/C cars

SUCHES AS:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    diminish tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001