Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery adapter set with wire.

FEATURES:
These are the white plastic male/female connectors more frequently
called Kyosho/Tamiya connectors. They also include the wire
installed in the connector.

SPECS:
The wire ought to balance about 3"-4" long. The wires are not the exact same
length.

INCLUDES:
A Kyosho battery adapter with wire.
A Tamiya battery adapter with wire.

WAJ
11/21/93

Regularly bought with the item that you are currently checking out.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a safe and secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

Regularly bought with the item that you are currently checking out.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Provides a safe and secure connection for battery and motor connections

SUCHES AS:
2 2-Pin Male Ultra Plug
4 short pieces of Black shrink tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

This is a great enhancement to the item currently being reviewed.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Battery charger w/Tamiya adapter and is planned for usage with 7.2V NiCd Stick Battery Loads.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capacity.  This charger is NOT advised for charging NiMh Cells, or 7.2V batteries to be utilized for racing.  We recommend that you get a great peak charger rather for that purpose. 

You will like this item if you have the item earlier stated.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Automobile Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are developed for usage on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.5mm

Get this item to boost the one you are reading about.



This is the Male and Female 2 Pin Battery Adapter
utilized on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic adapter
3 inches of wire

SUCHES AS:
One male end
One female end

NEEDS:
Soldering to choosen accessory

SPECIFICATIONS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This item compliments the main item here.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Provides a safe and secure connection for battery and motor connections on
    R/C automobiles

SUCHES AS:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001