Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery port set with wire.

FEATURES:
These are the white plastic male/female ports more commonly
called Kyosho/Tamiya ports. They likewise come with the wire
set up in the connector.

SPECS:
The wire should average about 3"-4" long. The wires are not the same
length.

INCLUDES:
A Kyosho battery port with wire.
A Tamiya battery port with wire.

WAJ
11/21/93

Frequently purchased with the product that you are currently reviewing.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design eliminates the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering ports onto wires

Frequently purchased with the product that you are currently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Provides a secure connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
Four short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end usage WSDM1303
For both Male and Female usage WSDM3001

This is a amazing enhancement to the product currently being gone over.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Charger w/Tamiya port and is planned for usage with 7.2V NiCd Stick Battery Loads.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capacity.  This charger is NOT suggested for charging NiMh Cells, or 7.2V batteries to be utilized for racing.  We suggest that you get an excellent peak charger instead for that function. 

You will love this product if you have the product previously mentioned.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are designed for usage on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Size: 2.5mm

Get this product to enhance the one you are reading around.



This is the Male and Female 2 Pin Battery Port
utilized on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic port
Three inches of wire

CONSISTS OF:
One male end
One female end

NEEDS:
Soldering to choosen device

SPECS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This product praises the main item below.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Provides a secure connection for battery and motor connections on
    R/C automobiles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001