Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery port set with wire.

FEATURES:
These are the white plastic male/female connectors more typically
called Kyosho/Tamiya connectors. They also feature the wire
set up in the connector.

SPECS:
The wire must balance about 3"-4" long. The wires are not the same
length.

INCLUDES:
A Kyosho battery port with wire.
A Tamiya battery port with wire.

WAJ
11/21/93

Regularly acquired with the item that you are presently reviewing.



This is a low-resistance, compact-size 2-Pin Ultra Plug Connector from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

Regularly acquired with the item that you are presently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Connector
from Deans.

FEATURES:
This design removes the possiblility of reverse polarity
connections
Offers a secure connection for battery and motor connections

INCLUDES:
2 2-Pin Male Ultra Plug
4 short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a fantastic addition to the item presently being reviewed.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Charger w/Tamiya port and is planned for use with 7.2V NiCd Stick Battery Loads.  Approximate charge time could be anywhere from 2-4 Hours depending on battery capacity.  This charger is NOT suggested for charging NiMh Cells, or 7.2V batteries to be used for racing.  We advise that you get a great peak charger rather for that purpose. 

You will certainly enjoy this product if you have the product just above mentioned.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.5mm

Get this item to improve the one you read around.



This is the Male and Female 2 Pin Battery Connector
used on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic port
Two inches of wire

INCLUDES:
One male end
One female end

NEEDS:
Soldering to choosen accessory

SPECIFICATIONS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This item compliments the main item here.



These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Offers a secure connection for battery and motor connections on
    R/C automobiles

INCLUDES:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001