Tamiya 1/10 Subaru Impreza WRX Sti RTR

This is the Electric Powered, Radio Controlled, 1/10 scale
Subaru Impreza WRX STI XV-01 Rally Car Chassis Package from Tamiya.

FEATURES:
Chassis: Molded plastic with front and rear wheel well liners for
    defense against mud
Own: Four wheel strengthened belt drive
Motor: 540 size brushed
Differentials: Bevel gear
Steering: Long tie-rod system to lower bump guide, high torque servo
    saver
Suspension: Double wishbone, reversible rear suspension for off-road
    driving and toe angle setting modifications
Ball Bearings: Full set
Shocks: CVA oil-filled plastic body
Battery Gain access to: Hatch on underside of chassis
Tires: Rally block 1.02" (26mm) large, 2.6" (65.4mm) diameter
    with foam inserts
Wheels: 16 spoke white plastic, 1" (25.4mm) large, 1.9" (48mm)
    diameter, 12mm hex
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind car
Caster: Adjustable, front and rear caster/toe-in refers to the angle
    of the suspension when seen from the side of the vehicle in relation
    to the chassis
Body: Clear untrimmed polycarbonate
Bumper: Front, urethane foam
Stimulate Gear: 68 tooth plastic
Pinion Gear: 22 tooth steel

CONSISTS OF:
XV-01 Pro Chassis Package with Shocks, Shock Oil, Tires, Foam Inserts,
    Wheels, Decals, Spur Gear, Pinion Gear, Clear Body and Guideline
    Handbook

NEEDS:
Radio: 2-channel with high-speed steering servo
ESC: For 540 size brushed motor, must handle a minimum of 23 turn motor
Battery: 7.2V 6-cell stick pack with Basic connector
Building and track devices

SPECS:
Automobile-
Length: 15.1" (384mm)
Width: 7.3" (185mm)
Wheelbase: 10.1" (257mm)
    Body-
Length: 17" (432mm)
Width: 7" (178mm)
Height: 4.1" (105mm)

REMARKS:
For replacement Ball Bearings usage:
    Qty. Size Place Qty. Bearing Set
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 4x8mm Idler Gear Shaft 1 DTXC1511
1 4x8mm Counter Gear 1 DTXC1511
1 5x10mm Counter Gear 1 DTXC1535
2 4x8mm Middle Shaft 1 DTXC1511
4 5x8mm Steering 2 DTXC1523
2 5x10mm Front Arms 1 DTXC1535
2 5x10mm Rear Arms 1 DTXC1535