Tamiya 1/10 Rising Fighter Off-Rd Buggy Kit

This is the 1/10 scale radio managed, electric powered
Tamiya Increasing Fighter off-road Racing Buggy Kit.

FEATURES:
Chassis: Monocoque plastic tub design chassis
Own: Rear wheel drive
Body: ABS resin body and wing molded in blue, chauffeur figure molded in
    white
Speed Control: Tamiya TEU-101BK forward and reverse Electronic Speed
    Control
Motor: 540 type
Plastic bushings
Shocks: Coil-over friction type with plastic bodies
Gearbox: Sealed rear gearbox
Differential: Bevel gear
Transmission: Single speed
Tires: Front, ribbed 1" (26mm) broad,
Rear, spike 1.5" (38mm) broad, both 3.2" (81mm) diameter
Wheels: White one-piece Front, 0.94" (24mm) broad
Rear, 1.4" (35mm) broad, both 2.4" (60mm) diameter
Bumper: Large black plastic front bumper
Suspension: Independent front A-arm and rear rolling rigid axle
Camber Tie Rods: fixed non-adjustable
Steering Tie Rods: adjustable
Steering: 2 guiding rods connect to the servo saver and knuckle arm

INCLUDES:
Tamiya Increasing Fighter rolling chassis w/friction shocks, 540 motor,
electronic speed control, molded body tires, wheels, 19 tooth 32
pitch pinion gear, 50 tooth counter gear, decal sheet and
developing instructions.
REQUIRES:
Radio: 2-Channel with 1 basic servo for guiding
Radio Batteries: (8) AA size
Battery: 6-cell stick pack w/standard port (7-cell will not fit)
Battery charger: AC/DC Timed or Peak for 6-cell battery
Misc. Products: Building and track devices

SPECS:
AUTOMOBILE-
Length: 16.4" (418mm)
Width: 9.3" (236mm)
Height: 7.4" (187mm)
Weight: 2.2bs (1000g)
    BODY-
Length: 10.6" (270mm)
Width: 5.8" (148mm) ahead of rear wheels (best point)
2.2" (55mm) ahead of front wheels (thinnest point)
Height: 3" (76mm)

REMARKS:
To upgrade to ball bearings use;
    Qty. Size Area Qty. Bearing Set
1 5x8mm Counter Equipment 1 DTXC1523
2 5x11mm Counter Equipment 1 DTXC1547
2 5x11mm Gearbox 1 DTXC1547
4 5x11mm Front Hubs 2 DTXC1547
4 5x11mm Back Hubs 2 DTXC1547
To paint vehicle to match photos on box the following colors are
    needed;
    TS44 Dazzling Blue, TAMR5044
    X-18 Semigloss Black, TAMR1518
    XF-15 Flat Flesh, TAMR1715