Suppo Model 10 Amp ESC

10A ESC updated with brand-new hardware/software;

brand-new functions: Break on/off programmable feature plug and flight.

Features:
Light weight
With 1A BEC
Lipo Battery Auto-detect
Auto Low battery Slow down at 3.0V/Lipo, cut-off at 2.9V/Lipo
Break on/off
Auto closed down without signal easy to use.

Get this product to boost the one you are reading around.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An outstanding motor for airplanes approximately 220 grams (8 oz) using 2 li-poly cells. Very light-weight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall mount. Great for little 3D airplanes weighing around 6 oz, or aerobatic airplanes approximately 8 oz. Use with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall mount flange. Note that the prop saver is sized for APC props. GWS props will require some adjustment to fit effectively. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. effectiveness existing: 2-6 Amp
NoLoad current / 0.3 Amp
Existing capacity: 7.5 A/60 s
Max. Effectiveness: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5