Suppo Model 10 Amp ESC

10A ESC updated with brand-new hardware/software;

brand-new features: Break on/off programmable feature plug and flight.

Features:
Light weight
With 1A BEC
Lipo Battery Automobile-detect
Auto Low battery Decrease at 3.0V/Lipo, cut-off at 2.9V/Lipo
Break on/off
Automobile closed down without signal simple to use.

Get this item to boost the one you are reading around.

1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An outstanding motor for airplanes up to 220 grams (8 oz) utilizing 2 li-poly cells. Very light-weight at 19 grams including integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall software mount. Great for small 3D airplanes weighing around 6 oz, or aerobatic airplanes up to 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor includes a 3mm solidified steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall software mount flange. Note that the prop saver is sized for APC props. GWS props will need some adjustment to fit appropriately. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. effectiveness current: 2-6 Amp
NoLoad current / 0.3 Amp
Present capability: 7.5 A/60 s
Max. Efficiency: 74%
Weight with cable televisions: 19g
Measurements (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5