Suppo Model A2217-8 1100Kv Brushless Outrunner Motor, 4mm Shaft, 3.5mm Bulle

A2217-8 Brushless motor Requirements

No. Of cells:
Ni-MH: 6-10
LiPo: 2-3

RPM/V: 1100KV

Max. effectiveness current: 5-16 A(>75%)

NoLoad current/ 10 V: 1.0 A

Current capability: 18 A/60 s

Max. effectiveness: 81%

Shaft size: 4 mm

Weight with cables: 70 g

Internal Resistance: 125m

Measurements (mm): 27.5 x 30

Advised Model Weight: 300-800 g

Recommended Prop: 10 x 5 or 11 x 5

This product is frequently acquired with the above discussed product.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced utilizing a pultrusion process. This method
    usages|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Providing considerably greater strength and tightness than
    glass filled nylon.
The extra tightness is useful to control of vibration
    resonance response.
The greater strength permits the use of thinner cross-sections,
    useful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Size: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

Get this product to enhance the one you are reading around.

9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Precision Composites.

FEATURES:
Gray composite one-piece building

INCLUDES:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 9"
Pitch: 6
Center inner size: 0.25" (6.35mm)

REMARKS:
For electric use just. Do not use with gas or nitro powered
    aircraft.