Suppo Model 930Kv Brushless Outrunner Motor, 3.17 Mm Shaft, 3.5Mm Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 930Kv
Max. efficiency existing: 4-10 Amp
NoLoad current / 10 V: 0.4 Amp
Current capability: 12 A/60 s
Max. Effectiveness: 80%
Shaft diameter: 3mm
Weight with cables: 47g
Measurements(mm): 27.5x30

Recomended design weight: 300 - 800 g
Recomended prop without gearbox: 10 cells (3S Lipo) 10x5

You will certainly love this thing if you have the thing earlier stated.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

This item is often acquired with the above mentioned item.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building

INCLUDES:
2 Connectors
2 Screws
2 Washers

NEEDS:
Nothing

SPECIFICATIONS:
Length: 4.8mm (3/16")
Diameter: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

COMMENTS:
Optimum pushrod diameter is .047 - 3/64" (1.22mm)

Several others have acquired this item along with the item that you are currently reading about.

9x6 Slow Flyer Propeller

This is a 9x6 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a lot of torque even at slow speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building minimizes rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist keep true, constant pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring direction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 6

COMMENTS:
Slo-Flyer props are Not created for Glow engines

This item is often acquired with the above mentioned item.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building minimizes rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist keep true, constant pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring direction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not created for Glow engines