Suppo Model 930Kv Brushless Outrunner Motor, 3.17 Mm Shaft, 3.5Mm Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 930Kv
Max. performance existing: 4-10 Amp
NoLoad current / 10 V: 0.4 Amp
Current capacity: 12 A/60 s
Max. Performance: 80%
Shaft size: 3mm
Weight with cables: 47g
Measurements(mm): 27.5x30

Recomended model weight: 300 - 800 g
Recomended prop without gearbox: 10 cells (3S Lipo) 10x5

You will like this product if you have the product above discussed.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

This product is regularly bought with the above stated product.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building and construction

INCLUDES:
2 Connectors
2 Screws
2 Washers

REQUIRES:
Absolutely nothing

SPECS:
Length: 4.8mm (3/16")
Size: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

REMARKS:
Optimum pushrod size is .047 - 3/64" (1.22mm)

Numerous others have bought this product together with the product that you are currently checking out.

9x6 Slow Flyer Propeller

This is a 9x6 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at sluggish speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help preserve true, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring guideline sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 9"
Pitch: 6

REMARKS:
Slo-Flyer props are Not created for Radiance engines

This product is regularly bought with the above stated product.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help preserve true, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring guideline sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not created for Radiance engines