Suppo Model 1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for airplanes as much as 220 grams (8 oz) utilizing 2 li-poly cells. Extremely light-weight at 19 grams consisting of integral prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and integral firewall program mount. Great for small 3D airplanes weighing around 6 oz, or aerobatic airplanes as much as 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, double ball bearings, integral prop saver for APC E props and integral firewall program mount flange. Note that the prop saver is sized for APC props. GWS props will need some adjustment to fit properly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. efficiency current: 2-6 Amp
NoLoad current / 0.3 Amp
Current capability: 7.5 A/60 s
Max. Effectiveness: 74%
Weight with cables: 19g
Measurements (mm): 27.6x11.5

Recomended model weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5

Here is a terrific product that many others have bought at the exact same time.

Skywalker 15A V2 Esc

This product is often purchased with the above pointed out product.

9x4.7 Slow Flyer Propeller

This is a 9x4.7 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Composite building and construction
Strengthening carbon fibers help maintain true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft locating rings
One locating ring guideline sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 9"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not designed for Radiance engines

This product compliments the main item below.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and benefiting from all the technological gains within this fantastic industry. Pulse is about power & efficiency at an expense that can be managed. Not does premium power come at a premium cost – Pulse provides everything in one pulse speeding up punch.

Delivering intense power for your RC applications, Pulse batteries provide everything you could imagine at a price never ever seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, allowing you to charge in fast succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, delivering mind numbing power levels that will take your flight to an entirely brand-new level of extreme. If you're trying to find power, you just discovered it. Pulse provides intense power for intense pilots, and when it concerns value, Pulse merely cannot be beat.
Feel the pulse, and get hold of a brand-new Pulse Ultra Battery for your 3D demands!



Specs:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Measurements: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not featured power leads, and will require completion user to solder their own style of battery adapter for the battery to be properly utilized. Pulse batteries come with bare leads covered with heat diminish protection, and are prepared for the adapter of choice to be soldered to the positive/negative leads.