Suppo Model 1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Suitable for indoor 3D Flight, 220g and under, with 10A speed controller or little Multi-Rotor frames with Hobbywing 6A esc.

An excellent motor for planes up to 220 grams (8 oz) using 2 li-poly cells. Really light-weight at 19 grams consisting of essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall program install. Great for little 3D planes weighing around 6 oz, or aerobatic planes up to 8 oz. Usage with a 10 Amp brushless ESC and little 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm hardened steel shaft, dual ball bearings, essential prop saver for APC E props and essential firewall program install flange. Note that the prop saver is sized for APC props. GWS props will require some modification to fit appropriately. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. effectiveness present: 2-6 Amp
NoLoad current / 0.3 Amp
Present capability: 7.5 A/60 s
Max. Performance: 74%
Weight with cables: 19g
Dimensions (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5

Below is a excellent product that many others have bought at the exact same time.

Skywalker 15A V2 Esc

This product is frequently purchased with the above discussed product.

9x4.7 Slow Flyer Propeller

This is a 9x4.7 Slo-Flyer "tractor" (not a "pusher") airplane propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Composite construction
Reinforcing carbon fibers assist keep real, constant pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring instruction sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not created for Glow engines

This product compliments the main item right here.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and benefiting from all the technological gains within this amazing market. Pulse has to do with power & performance at a cost that can be afforded. No longer does exceptional power come at a premium price – Pulse delivers all of it in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries provide everything you could think of at a rate never seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in rapid succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to a totally new level of extreme. If you're searching for power, you simply found it. Pulse delivers extreme power for extreme pilots, and when it pertains to value, Pulse simply cannot be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D needs!



Specifications:
Voltage: 11.1V
Cell Count: 3S
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not featured power leads, and will require completion user to solder their own style of battery adapter for the battery to be appropriately used. Pulse batteries feature bare leads covered with heat diminish security, and are all set for the adapter of choice to be soldered to the positive/negative leads.