Suppo Model 1400Kv Brushless Outrunner Motor, 3.17 MM Shaft, 3.5MM Bullet Co

Ideal for indoor 3D Flight, 220g and under, with 10A speed controller or small Multi-Rotor frames with Hobbywing 6A esc.

An exceptional motor for airplanes approximately 220 grams (8 oz) utilizing 2 li-poly cells. Very lightweight at 19 grams suching as essential prop saver for APC 8x3.8 SloFly or APC 8x4 E propeller and essential firewall program install. Great for small 3D airplanes weighing around 6 oz, or aerobatic airplanes approximately 8 oz. Use with a 10 Amp brushless ESC and small 7.4V lithium batteries in the 400mah - 800mah range.

The motor features a 3mm solidified steel shaft, dual ball bearings, essential prop saver for APC E props and essential firewall program install flange. Keep in mind that the prop saver is sized for APC props. GWS props will require some modification to fit correctly. Countersunk installing holes have 31mm spacing on centers.

Specifications
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1400Kv
Max. performance present: 2-6 Amp
NoLoad current / 0.3 Amp
Present capacity: 7.5 A/60 s
Max. Efficiency: 74%
Weight with cables: 19g
Dimensions (mm): 27.6x11.5

Recomended design weight: 3D 220 g and under
Recomended prop without gearbox: 2xLi 8X4 - 3xLi 7X3.5

Below is a terrific product that lots of others have bought at the very same time.

Skywalker 15A V2 Esc

This product is frequently gotten with the above stated product.

9x4.7 Slow Flyer Propeller

This is a 9x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Composite building and construction
Reinforcing carbon fibers assist preserve real, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft finding rings
One finding ring guideline sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
Might need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 9"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not created for Glow engines

This product praises the main item right here.

LIPO 860mAh 11.1V 35C

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer technology, and making the most of all the technological gains within this fantastic market. Pulse is about power & performance at an expense that can be paid for. No longer does exceptional power come at a premium cost – Pulse delivers all of it in one pulse accelerating punch.

Delivering extreme power for your RC applications, Pulse batteries provide everything you could think of at a rate never seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in quick succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to a completely brand-new level of extreme. If you're searching for power, you just found it. Pulse delivers extreme power for extreme pilots, and when it concerns value, Pulse just can't be beat.
Feel the pulse, and grab a new Pulse Ultra Battery for your 3D demands!



Requirements:
Voltage: 11.1V
Cell Count: THREE
Capacity: 860mAh
Discharge Rate: 35C
Charge Rate:
Dimensions: 58mm x 31mm x 24.5mm (LxWxH)
Weight:
Balance Tap: JST-XH

Item Note:
Pulse batteries do not come with power leads, and will require completion user to solder their own design of battery adapter for the battery to be correctly utilized. Pulse batteries include bare leads covered with heat shrink security, and are ready for the adapter of choice to be soldered to the positive/negative leads.