JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Suppo Model 1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn (Suppo Model SU-A2217-7 | SU-A2217-7)

Model: Suppo Model SU-A2217-7
Dist. #: SU-A2217-7   SKU: SU-A2217-7

Be the first to review this product. (Write Review)

Out of stock

Price:  $22.95

This item will earn you 23 reward point(s).
23 points = $0.46 off your next order. Learn More

Updated on Mar 28, 2024 04:09:27 AM

1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn...
LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1250Kv
Max. effectiveness existing: 5-18 Amp
NoLoad current / 1.0 Amp
Current capacity: 18 A/60 s
Max. Efficiency: 75%
Shaft diameter: 4mm

Suggested Model Weight: 300 - 800 g
Recommended Prop w/o Gearbox: 2s - 10 x 4.7; 3s - 9 x 5

This is a great enhancement to the product presently being talked about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
Two control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
Two installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "includes" above

Regularly bought with the product that you are presently reviewing.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made using a pultrusion procedure. This technique
    ca{uses|triggers} the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, enabling a higher fiber (60%) to resin (nylon binder)
    density. Offering substantially higher strength and tightness than
    glass filled nylon.
The additional tightness is advantageous to control of vibration
    resonance response.
The higher strength enables the use of thinner cross-sections,
    advantageous to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Center Thickness: 0.40"
Center Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

Want an additional fantastic product to compliment the above pointed out product?

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging material:
1 x 9g TITAN Servo Sets (with devices)

This product praises the main item below.

EC3 Device Connector (2)

Specifications
Battery/Charger Add-on: Ports
Connector Type: EC3

Here is a fantastic product that many others have actually purchased the same time.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist maintain true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of small shaft finding rings
One finding ring direction sheet

NEEDS:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not developed for Radiance engines

Frequently Bought Together

Suppo Model 1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn
+
Vortex Hobbies Tower Pro SG90 Servo
+
APC 8x6 Thin Electric Prop
This Item: Suppo Model 1250Kv Brushless Outrunner Motor, 4MM Shaft, 3.5MM Bullet Conn
$22.95
Vortex Hobbies Tower Pro SG90 Servo
$5.99
APC 8x6 Thin Electric Prop
$3.89

Total Price: $32.83

Add All Three To Cart
Visual Parts Finder
";